Siemens V1.0 user manual

Page 13

g) Next, right click on the IE General Card and insert the PROFINET IO System.

The Ethernet network should now be displayed as shown below.

- 13 -

Image 13

Contents ProfinetCommander Version History Table of ContentsHardware and Software Requirements IntroductionSelect the IP Addresses Configuring the PC Station and the Profinet IO NetworkIP Address Subnet Mask Double-click on Ethernet connection Edit the Station Configuration Add Application Select IE General Select Ethernet Card Configure the Profinet IO Network Page Page Page Page Page Page Download the Configuration to the PC Station Page Download the Profinet IO Device Names Exporting the Hardware Configuration to a File Using ProfinetCommander Starting ProfinetCommander Configuration Display Setting IO Device Outputs Setting the Run Mode to OperateDisplaying Diagnostic Alarms Reading Diagnostics Read Diagnostics Stored in IO Devices