Siemens V1.0 user manual Configure the Profinet IO Network

Page 9

f)Check that the Run/Stop column has green indicators. If not, select the Diagnostics tab to determine the error.

Configuration OK

4.3Configure the PROFINET IO Network

a)Execute SIMATIC NCM PC Manager (or STEP7 SIMATIC Manager). Create a new project with File->New.

Select “Insert->Station->SIMATIC PC Station”.

Change the name to match the PC station name in the Station Configuration Editor (e.g., PCStation) as shown below.

- 9 -

Page 8 Page 10
Image 9
Page 8 Page 10
Contents ProfinetCommander Version History Table of ContentsHardware and Software Requirements IntroductionConfiguring the PC Station and the Profinet IO Network Select the IP AddressesIP Address Subnet Mask Double-click on Ethernet connection Edit the Station Configuration Add Application Select IE General Select Ethernet Card Configure the Profinet IO Network Page Page Page Page Page Page Download the Configuration to the PC Station Page Download the Profinet IO Device Names Exporting the Hardware Configuration to a File Using ProfinetCommander Starting ProfinetCommander Configuration Display Setting IO Device Outputs Setting the Run Mode to OperateDisplaying Diagnostic Alarms Reading Diagnostics Read Diagnostics Stored in IO Devices
Top Page Image Contents