Siemens V1.0 user manual

Page 10

b)Next, the configuration download interface is set up for the PC Ethernet card. Select “Options->Set PG/PC Interface”.

c)Select the Ethernet card that is assigned to IE General in the Station Configuration Editor and hit OK.

- 10 -

Image 10

Contents ProfinetCommander Table of Contents Version HistoryIntroduction Hardware and Software RequirementsSelect the IP Addresses Configuring the PC Station and the Profinet IO NetworkIP Address Subnet Mask Double-click on Ethernet connection Edit the Station Configuration Add Application Select IE General Select Ethernet Card Configure the Profinet IO Network Page Page Page Page Page Page Download the Configuration to the PC Station Page Download the Profinet IO Device Names Exporting the Hardware Configuration to a File Using ProfinetCommander Starting ProfinetCommander Configuration Display Setting the Run Mode to Operate Setting IO Device OutputsDisplaying Diagnostic Alarms Reading Diagnostics Read Diagnostics Stored in IO Devices