Siemens V1.0 user manual Using ProfinetCommander Starting ProfinetCommander

Page 20

5.0Using ProfinetCommander

5.1Starting ProfinetCommander

Start ProfinetCommander either from the Windows Desktop icon or by selecting

Start->Program->PROFI Interface Center->ProfinetCommander->ProfinetCommander.

5.2 Opening the HW Config Export File

Select the “Open Config File” button and then use the dialog to find and open the HW Config export file that was previously generated for the PC Station.

- 20 -

Image 20

Contents ProfinetCommander Table of Contents Version HistoryIntroduction Hardware and Software RequirementsIP Address Subnet Mask Configuring the PC Station and the Profinet IO NetworkSelect the IP Addresses Double-click on Ethernet connection Edit the Station Configuration Add Application Select IE General Select Ethernet Card Configure the Profinet IO Network Page Page Page Page Page Page Download the Configuration to the PC Station Page Download the Profinet IO Device Names Exporting the Hardware Configuration to a File Using ProfinetCommander Starting ProfinetCommander Configuration Display Setting the Run Mode to Operate Setting IO Device OutputsDisplaying Diagnostic Alarms Reading Diagnostics Read Diagnostics Stored in IO Devices