Siemens V1.0 user manual Edit the Station Configuration

Page 6

4.2Edit the Station Configuration

a)Execute the Station Configuration Editor by double-clicking its icon in the Windows System Tray toolbar. It can also be called up from the desktop icon or the Start menu.

b)Use the “Station Name…” button to set the station name as desired (remember the name because it must be used later when creating the PROFINET IO configuration).

Station Name

Click to Change

Station Name

- 6 -

Image 6

Contents ProfinetCommander Table of Contents Version HistoryIntroduction Hardware and Software RequirementsConfiguring the PC Station and the Profinet IO Network Select the IP AddressesIP Address Subnet Mask Double-click on Ethernet connection Edit the Station Configuration Add Application Select IE General Select Ethernet Card Configure the Profinet IO Network Page Page Page Page Page Page Download the Configuration to the PC Station Page Download the Profinet IO Device Names Exporting the Hardware Configuration to a File Using ProfinetCommander Starting ProfinetCommander Configuration Display Setting the Run Mode to Operate Setting IO Device OutputsDisplaying Diagnostic Alarms Reading Diagnostics Read Diagnostics Stored in IO Devices