Siemens V1.0 user manual Displaying Diagnostic Alarms

Page 23

5.6 Displaying Diagnostic Alarms

When a diagnostic alarm is received from a PNIO Device, it is displayed in the Alarms window as shown below. At startup, ProfinetCommander reads the GSD files for all the devices to get text for the diagnostic error codes. The text for the diagnostic error is also displayed if it is available. If not, consult the manufacturers documentation.

	Error Text
Diagnostic Alarm	from GSD File
Diagnostic Alarm	(if it exists)

- 23 -

Image 23

Contents ProfinetCommander Version History Table of ContentsHardware and Software Requirements IntroductionIP Address Subnet Mask Configuring the PC Station and the Profinet IO NetworkSelect the IP Addresses Double-click on Ethernet connection Edit the Station Configuration Add Application Select IE General Select Ethernet Card Configure the Profinet IO Network Page Page Page Page Page Page Download the Configuration to the PC Station Page Download the Profinet IO Device Names Exporting the Hardware Configuration to a File Using ProfinetCommander Starting ProfinetCommander Configuration Display Setting IO Device Outputs Setting the Run Mode to OperateDisplaying Diagnostic Alarms Reading Diagnostics Read Diagnostics Stored in IO Devices