Siemens V1.0 user manual Select IE General Select Ethernet Card

Page 8

d)Select Index 2 and use the “Add…” button to add the Ethernet card, “IE General”, and select the appropriate card if more than one exists as shown below.

Select IE General

Select Ethernet Card

e)After hitting OK the component properties of your Ethernet Adapter appear. Check the IP address, subnet mask, and gateway. Select the Network Properties button if changes need to be made.

- 8 -

Image 8

Contents ProfinetCommander Table of Contents Version HistoryIntroduction Hardware and Software RequirementsIP Address Subnet Mask Configuring the PC Station and the Profinet IO NetworkSelect the IP Addresses Double-click on Ethernet connection Edit the Station Configuration Add Application Select IE General Select Ethernet Card Configure the Profinet IO Network Page Page Page Page Page Page Download the Configuration to the PC Station Page Download the Profinet IO Device Names Exporting the Hardware Configuration to a File Using ProfinetCommander Starting ProfinetCommander Configuration Display Setting the Run Mode to Operate Setting IO Device OutputsDisplaying Diagnostic Alarms Reading Diagnostics Read Diagnostics Stored in IO Devices