Peerless Industries UST-WallArm3 manual Roll Adjustment, Pitch Adjustment

Page 12

Roll Adjustment

14	Loosen knobs on left side of projector, and tighten
	knobs on right side of projector to roll projector to

the right. Reverse for projector roll to the left.

LOOSEN TIGHTEN DO NOT

ADJUST

SUPPORTING SURFACE NOT

SHOWN FOR CLARITY

Pitch Adjustment

Loosen knobs on front of projector, and tighten knobs on back of projector to pitch projector forward. Reverse for projector to pitch backward.

LOOSEN TIGHTEN DO NOT

ADJUST

SUPPORTING SURFACE NOT

SHOWN FOR CLARITY

12 of 14

ISSUED:07-25-11 SHEET #: 125-9225-1

Image 12

Contents Dukane Projector Short Throw Wall ARM Tools Needed for Assembly Table of ContentsCDE Wall Plate Location Screen Active ImageInstallation to Single Wood Stud Wall Installation to Solid Concrete or Cinder Block Remove knobs and M10 washers from top AR H Installation using Wall Arm Bracket Projector Position for 60 70 Screen SizeInstallation using Wall Arm Bracket and Extension Bracket Projector Position for 70 100 Screen SizeProjector Cables Front of Projector Roll Adjustment Pitch AdjustmentSwivel Adjustment Combination for Pitch and Roll RotationSecure wall plate cover E to wall arm bracket C using two