Peerless Industries UST-WallArm3 manual Wall Plate Location, Screen Active Image

Wall Plate Location

1	Determine and mark the top edge of the
	screen active image.

NOTE: Make sure to leave adequate space above the top edge of the active image for the wall arm and projector to be installed. Approximate dimension (23.0")

Using your mark for the top edge of active image determine dimension B to locate the bottom wall plate (D) mounting hole.

A = Board size / diagonal active image size

B = Distance from the top edge of the active image to the bottom mounting hole of wall plate (D).

C = Distance from the top edge of the active image to the bottom edge of wall plate (D).

SCREEN ACTIVE IMAGE

MANUFACTURER	MODEL	A	B	C
Hitachi Starboard	Trio 88	88	13.90	11.90
Hitachi Starboard	Trio 77	77	11.68	9.68
Mimio	HD90	88	13.90	11.90
Mimio	Board 80	78	11.82	9.82
Mimio	Board 100	98	14.60	12.60
Polyvision/ENO	TS620	77.8	11.79	9.79
Polyvision/ENO	TSL620	77.8	11.79	9.79
Polyvision/ENO	2610	78	11.82	9.82
Polyvision/ENO	2650	75‐16:10	12.00	10.00
Polyvision/ENO	2650	75‐4:3	11.40	9.40
Polyvision/ENO	2810	96	15.10	13.10
Polyvision/ENO	2850	93‐16:10	14.65	12.65
Polyvision/ENO	2850	93‐4:3	13.85	11.85
Promethean	587 Pro	87	13.75	11.75
Promethean	387	87	13.75	11.75
Promethean	387 Pro	87	13.75	11.75
Promethean	595 Pro	95	14.95	12.95
Promethean	395	95	14.95	12.95
Promethean	395 Pro	95	14.95	12.95
Promethean	164	64	9.86	7.86
Promethean	378	78	11.82	9.82
Promethean	378 Pro	78	11.82	9.82
Promethean	178	78	11.82	9.82
Smart	885	87	13.75	11.75
Smart	685	87.13	13.76	11.76
Smart	690	94	14.80	12.80
Smart	660	64	9.86	7.86
Smart	880	77	11.68	9.68
Smart	680	77	11.68	9.68

BOTTOM	D	AMOUNT OF VERTICAL ADJUSTMENT
		PROJECTOR MIRROR
MOUNTING HOLE

2.0"	8.9"
	7.5"

BC

TOP OF ACTIVE IMAGE

.7

.7

A

SCREEN CENTER	BOARD THICKNESS
4 of 14	ISSUED:07-25-11 SHEET #: 125-9225-1