Peerless Industries UST-WallArm3 manual Combination for Pitch and Roll Rotation, Swivel Adjustment

Page 13

Combination for Pitch and Roll Rotation

Tighten knob on back right of projector, and loosen knob on left front of projector to pitch and rotate projector backward to the right as shown in fig. 13.1. Reverse for projector to pitch backward to the left.

Loosen knob on back right of projector, and tighten knob on left front of projector to pitch and rotate projector backward to the right as shown in fig. 13.2. Reverse for projector to pitch backward to the left.

SUPPORTING SURFACE NOT

SHOWN FOR CLARITY

Fig. 13.1

NOTE: For more adjustment, knobs can be turned individually

LOOSEN TIGHTEN DO NOT

ADJUST

Swivel Adjustment

Grip sides of projector and gently rotate to desired position.

D

SUPPORTING SURFACE NOT

SHOWN FOR CLARITY

13 of 14

ISSUED:07-25-11 SHEET #: 125-9225-1

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dukane Projector Short Throw Wall ARM Table of Contents Tools Needed for AssemblyCDE Screen Active Image Wall Plate LocationInstallation to Single Wood Stud Wall Installation to Solid Concrete or Cinder Block Remove knobs and M10 washers from top AR H Projector Position for 60 70 Screen Size Installation using Wall Arm Bracket Projector Position for 70 100 Screen Size Installation using Wall Arm Bracket and Extension BracketProjector Cables Front of Projector Pitch Adjustment Roll AdjustmentCombination for Pitch and Roll Rotation Swivel AdjustmentSecure wall plate cover E to wall arm bracket C using two
Top Page Image Contents