Peerless Industries UST-WallArm3 manual Secure wall plate cover E to wall arm bracket C using two

Page 14

14	Secure wall plate cover (E) to wall arm bracket (C) using two
	M5 x 10 mm socket pin serrated washer head screws (T).

Note: Adjust height of wall plate prior to fastening wall plate cover (E) for projector image location. Use security wrench (Q) to fasten screws.

T

C

E

SUPPORTING SURFACE NOT

SHOWN FOR CLARITY

14 of 14

ISSUED:07-25-11 SHEET #: 125-9225-1

© 2009 Peerless Industries, Inc. All rights reserved. Peerless is a registered trademark of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

Image 14

Contents Dukane Projector Short Throw Wall ARM Tools Needed for Assembly Table of ContentsCDE Wall Plate Location Screen Active ImageInstallation to Single Wood Stud Wall Installation to Solid Concrete or Cinder Block Remove knobs and M10 washers from top AR H Installation using Wall Arm Bracket Projector Position for 60 70 Screen SizeInstallation using Wall Arm Bracket and Extension Bracket Projector Position for 70 100 Screen SizeProjector Cables Front of Projector Roll Adjustment Pitch AdjustmentSwivel Adjustment Combination for Pitch and Roll RotationSecure wall plate cover E to wall arm bracket C using two