Smart Technologies 3000i manual Contents

Page 3

Contents

Installing the Room Control Module	1
About the Custom Straight-Through MOD4 I2C Cables	1
Removing the Blank Panel	2
Completing the Computer 2 (X-Port 20) Serial Panel Connections	3
Inserting the Room Control Module	5
Updating the Control Panel Firmware	7
Connecting the I2C Flash Adapter Cable (Serial No. 05000-05999)	7
Connecting the I2C Control Panel Flash Cable (Serial No. 07000-07999) ....	9
Connecting to a Third-PartyRoom-Control System	10
Updating the Control Panel Firmware	11
Customer Support	14
Contacting SMART Technical Support	14
Other SMART Contacts	14
Product Warranty	14

99-00360-02 REV A0

Contents

Image 3

Contents Room Control Module FCC Warning Contents Page About the Custom Straight-Through MOD4 I2C Cables Installing the Room Control ModuleRemoving the Blank Panel Completing the Computer 2 X-Port 20 Serial Panel Connections MOD4 I2C Cable Inserting the Room Control Module Reconnect the computer 2 serial cable Updating the Control Panel Firmware Connecting the I2C Flash Adapter Cable Serial NoVertical Jack I2C Control Panel Flash Cable Connecting the I2C Control Panel Flash Cable Serial No Connecting to a Third-Party Room-Control System Use the following pin assignment for the cable Updating the Control Panel FirmwareTo update the control panel firmware Attempting to Program the Firmware on the Wonderbar Other Smart Contacts Product WarrantyCustomer Support Contacting Smart Technical Support