4Disconnect the MOD4 I2C cable at the top of the computer 2 serial panel.
MOD4 I2C Cable
Rear of Cabinet
5Run this cable behind the patch panel and through the opening where the blank panel was removed.
Rear of Cabinet
MOD4 I2C Cable
6Hold the computer 2 serial panel with your right hand. Use your left hand to run the MOD4 I2C cable that came with the Room Control Module kit through the opening where you removed the blank panel. Connect this cable to the jack on the computer 2 serial panel from which you removed the other MOD4 I2C cable.
Connect the MOD4 I2C cable to the computer 2 serial panel
Run the MOD4 I2C cable through the opening
Rear of Cabinet
4 | Room Control Module Installation Guide for the 3000i |