8BLOCK OPERATIONS (COPY/MOVE/DELETE)
1. Block Copy
dlsploy text )
I
•position cursor ot
flrsl chorocter
I
/
tter,OOl'The market wtll continually gra
i W as
I
STORE BLOCK I
move cursor lo
last character
move | cursor | to | # |
target | posil | Ion |
Ex ....
Consumers will be For
I increases. IJl
.
E_
increases. #_ Consumers will be tot J Icedtoto do whatever is necessary ant this
\
This function copies a block of text and inserts the copy at a specified location in the file. Block copy does not alter
:_ .......er:._emove the contents of.the original block.
1)Display the file text using the edit mode.
2)Position the cursor on the first character of the text to be copied.
3)Hold down the Code Key and press the "P" Key. This marks the beginning of the block. Two beeps sound and- a "T" appears above "BLOCK" on the display. (BLOCK function becomes effective at this time.)
4)Move the cursor to the last character of ihe text to be copied.
5)Hold down the Code Key and press the "P" key again to mark the end of the block. Two beeps sound, indicating that the block of text has been defined. The defined block of text starts flashing on the display.
6)Move the cursor to the position where you want to copy the block of text.
7)Hold down the Code key and press the "L" key. The block
of texLis copJed:at:thespeeified, position:,:The t' V." abo_ze: ....
"BLOCK" disappears. The block functionis
®If the defined block of text does not exceed 1 character, the copy operation is not carried out and the block func- tion is canceled.
43