Sears 514, 153, 16, 090 warranty Text/lhrase/lato?n

I

Text/'l;hrase/'l_at'o_?n

STOREI

t

yY

TORE _I_T_,N

3)"Text/Phrase/Format?" appears On the LCD, .'T, "P" and "F" will flash.

4)Press the "T" (TEXT) Key.

The paper is fed one line and the Carrier retums to the left margin. The LCD is cleared and the counter indicating the number of spaces to the right margin appears. The

LAutomatic return is automatically activated.

+

0 MARGIN/TABSET	v	472
v
s I_RE	R£'_
set margln/tab	,,._

•Margin and tab settings, as well as other functions which were in effect before entering the STORE mode, are automatically canceled to be stored in the back-up mem- ory. They are automatically recalled when you exit the STORE mode.

5)Hold down the Code Key and press the "F" Key. "O MARGIN/TAB SET" appears.

6)Set the left and right margins and tabs, as you would in the NP mode. Clear any unnecessary tabs.

I		Y 472 i,	7)	Hold down		the Code Key and press the "F" Key again.
	V			"_	MARGIN/TAB		SET" disappears. The Carder returns to
				the	newly	set left	margin.

STORE I_._ET_q.N

enter text

8)Enter text_ Entered text is displayed on the LCD and pdnted one line at a time when you type a normal hyphen or space in the automatic carder return zone.

®Make corrections on the LCD before the line is printed. Once text is printed on paper, it cannot be corrected: To make corrections after text has been printed, first close the file and edit it on the LCD, as described in section 3, "File Editing".

I

		Y/N?		l
I CLOSING	FILE		v
	Y	I
	STORE		ltBTUAN

I Y	472 I
NP

g)Press the Mode Key to terminate the STORE mode. "CLOSING FILE Y/N?" appears on the LCD.

10)Press the "Y" Key to close the file and return to the Nor- mal Print (NP) mode.

O Press the "N" Key to return to the Text storing mode.

31