D =HOW TO CHANGE.: RIBBON CASSETTE
1. Removing Ribbon Cassette
_Ribb_n" Cassette Stand
1)Turn off the machine and open the Top Cover.
2)Hold down the Ribbon Cassette Stand with your thumbs and gently remove the Cassette by pulling upward on the Cassette Arms as shown.
OLook through the window in the Cassette to check on how much ribbon remains, tf you see colored tape in the window, replace the Ribbon Cassette with a new one.
=Installing Ribbon Cassette
1)Before installing a new Ribbon Cassette, always take up any slack in the ribbon by winding the Ribbon Takeup Knob counterclockwise, and remove tab on Cassette Rib- bon.
®When installing a new ribbon, wind past the colored por- tion at the beginning.
2)Fit the two projections at the back of the Ribbon Cassette into the two slots in the Ribbon Cassette Stand.
Card Holder | Printwheel |
4!- | 4!. |
3)Carefully lower the front of the cassette so that the ribbon fits betv_en the Card Holder and Printwheel. Press the
portions marked "A" in the illustration until the Ribbon Cassette snaps into place.
4)Turn the Ribbon Takeup Knob counterclockwise until it
locks into place O. Then, turn it clockwise until it stops
®.
5)Close the Top Cover.
7