To access the menu when the printer is set to Limited Operation, follow this procedure.
1.Verify that continuous feed paper is installed.
2.Verify that the ribbon is correctly installed.
3.Verify that the width of the installed paper matches the paper width menu setting.
CAUTION:
If the Menu is set for wide paper, and narrow paper is used, the printhead will print on the platen. This could damage / destroy the printhead, platen, and ribbon.
4.Power off the printer.
5.Press and hold the SEL switch while powering on the printer.
6.The MENU lamp will light. If the printer was selected, the SELECT lamp will light. When in Menu Mode, the functions printed below the operator panel switches are active.
7.Press GROUP until
8.Press ITEM until Operator Panel Function prints.
9.Press SET until FULL OPERATION prints.
10.Press EXIT to save the change and exit Menu Mode.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)