Oki ML520, ML521 manual Yes No

Paper Out Override	No Yes
Print Registration	O 0.05 mm Left 0.10 mm Left 0.15 mm Left 0.20
	mm Left 0.25 mm Left 0.25 mm Right 0.20 mm
	Right 0.15 mm Right 0.10 mm Right 0.05 mm
	Right
Operator Panel Function	Full Operation Limited Operation
Reset Inhibit	No Yes
Print Suppress Effective	Yes No
Auto LF	No Yes
Auto CR * * * *	No Yes
CSF Bin Select * * *	Bin 1 Bin 2
Print DEL Code * *	No Yes
SI Select Pitch (10 CPI) * *	17.1 15 cpi
* *
SI Select Pitch (12 CPI) * *	20 12 cpi
* *
Time Out Print	Valid Invalid
Auto Select	No Yes
Printhead Gap Adjust	0 - 1 + 1

*Model 521 only

** Appears only when Microline emulation is selected

** * Appears only when optional Cut Sheet Feeder is installed

** * * Appears only when IBM Proprinter emulation is selected

** * * * Appears only when Epson LQ emulation is selected

** * * * * Appears only when optional Serial Interface is installed

** * * * * * Appears only when optional Roll Paper Stand is installed

Factory default settings are printed in Bold Italic.