Page: 65
Service Guide ML520/521
Chapter 2 Principles of Operation
2.2.09 Paper Park
If continuous feed paper is installed and printing on cut sheet paper is desired, it is not necessary to unload the continuous feed paper. The Paper Park feature provides a means of retracting the continuous feed paper from the paper path, while (at the same time) cut sheet paper is fed.
Paper Park Operation
Place the change lever in the REAR FEED or BOTTOM FEED position.
Press the PARK switch on the operation panel.
A reverse line feed operation retracts the paper until
NOTE:
Retracting 19 inches of paper without detecting a
The operator can press the SEL switch to reset the ALARM LED and press the PARK switch to continue the park operation.
This operation may be useful when length of the paper to be parked is greater than 19 inches.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)