Paper Park
Automatic Paper Loading
Forms Tear Off
1.6.15 Paper Loading
Auto Loading (Top Feed)
Press FORM FEED / Load switch to feed paper to default position
1.6.16 Paper Out Detection
Distance from end of paper
Rear Feed: 0.5 inches (12.7 mm)
Bottom Feed: 0.5 inches (12.7 mm)
Top Feed: 0.5 inches (12.7 mm)
1.6.17 Paper Tear Capabilities
Forms
Metal Tear Bar (with optional bottom feed tractor unit)
1.6.18Print Method
Printhead Type General Information
Impact: Dot Matrix 9 pin printhead
.0134 inch (0.34 millimeter) diameter pins
Overheat Protection
When printhead temperature exceeds 110 degrees Celsius, the printer stops
If the temperature exceeds 118 degrees Celsius, printing stops.
Printing will resume when the printhead temperature drops below 118 degrees Celsius.
NOTE:
Refer to Section Two for more information on printhead operation.
Printhead Gap Information
Three items factor into printhead gap information: