Page: 63
Service Guide ML520/521
Chapter 2 Principles of Operation
2.2.08 Automatic Paper Load
The Microline 520/521 printers will automatically detect cut sheet paper and feed the paper to the Top of Form (TOF) position.
Cut Sheet Paper
Set the change lever to the TOP FEED position.
NOTE:
When the change lever is in the TOP FEED position, the cut sheet detection lever contacts the cut sheet detection switch (BASW), which is located on the main control board.
Insert the sheet of paper between the platen and the paper chute.
Once paper is detected at the paper end sensor and the amount of time selected on the Wait Time setting of the menu has lapsed, the line feed motor will feed the paper until the leading edge of the paper reaches the top of form position.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)