Chapter 4 - MultiVOIP Software
Voice/Fax Tab
The Voice/Fax tab controls the voice coder, Fax settings, DTMF gain, and some miscellaneous options.
The MultiVOIP supports many
The Fax group enables a fax machine to transmit and receive faxes through the MultiVOIP. If a fax machine is connected to one of the voice/fax channels, the Max Baud Rate should be set to match the baud rate of the fax machine. Refer to user documentation for the fax machine. The Fax Volume setting controls the output level of the fax tones, and this setting should be changed only under the direction of
The DTMF Gain group controls the volume level of the digital tones sent out for Touchtone dialing. The Gain High and Gain Low boxes control the gain in dB (decibels) of the High and Low tones in the tone pairs; the default gain values are
You can enable the voice/fax miscellaneous features by selecting the Silence Compression, Echo Cancellation, or Forward Error Correction check boxes.
The Silence Compression check box defines whether silence compression is enabled for this voice channel. If silence compression is enabled, the MultiVOIP 800 will not transmit voice packets when silence is detected, thereby reducing the amount of network bandwidth that is being used by the voice channel.
The Echo Cancellation check box defines whether echo cancellation is enabled for this voice channel. If echo cancellation is enabled, the MultiVOIP 800 will remove echo delay, which improves the quality of sound.
The Forward Error Correction (FEC) check box defines whether forward error correction is enabled for this voice channel. The FEC feature allows some of the voice packets that were corrupted or lost to be recovered. FEC adds an additional 50% overhead to the total network bandwidth consumed by
42