Appendix C - Regulatory Information
FCC Part 68 Telecom
1.This equipment complies with Part 68 of the Federal Communications Commission (FCC) rules. On the outside surface of this equipment is a label that contains, among other information, the FCC registration number. This information must be provided to the telephone company.
2.As indicated below, the suitable jack (Universal Service Order Code connecting arrangement) for this equipment is shown. If applicable, the facility interface codes (FIC) and service order codes (SOC) are shown.
3.An
4.If this equipment causes harm to the phone network, the phone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the phone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
5.The phone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the phone company will provide advance notice in order for you to make necessary modifications in order to maintain uninterrupted service.
6.If trouble is experienced with this equipment (the model of which is indicated below) please contact
7.No repairs are to be made by you. Repairs are to be made only by
8. Manufacturer: | |
Trade name: | MultiVOIP |
Model Numbers: | MVP800 |
FCC Registration Number: | |
REN: | 0.2A |
Modular Jack (USOC): | |
Service Center in U.S.A.: | |
| 2205 Woodale Drive |
| Mounds View, MN 55112 |
| (763) |
77