BT PaperJet 40 manual Help Display shows no Phone Line, Display shows no Dial Tone, Interrupted

BT PaperJet 40 UG – Issue 2 – Edition 2 – 18.03.04 – 6026

44 Help

	Display shows NO PHONE LINE.
	Check your machine is installed correctly.
	Display shows NO DIAL TONE.
	Check your telephone line cable is plugged into the socket marked LINE
	on your BT PaperJet 40.
	Display continually shows BUSY or faxes you send are constantly
	interrupted.
	Try sending the fax using the			button so you can hear the progress of
	your call.
	Press	and dial the number manually. If the recipient is using an
	answering machine, wait until you hear the tone after the recorded
	message, then press		.
	When you answer the phone you hear the fax tones or silence.
	Your machine is receiving a fax. Press				– or if answering on an
	attached phone, press			– then replace the handset.
	Display shows EXTERNAL PHONE and the				light flashes.
BT PaperJet Helpline	Indicates a separate phone connected to the BT PaperJet 40 line cord
	socket is being used.
0870 241 6538

Call the dedicated BT PaperJet Helpline:

if you are having difficulties using your BT PaperJet 40.

The Helpline will be open from 8.30am to 5.30pm Monday to Friday, except for UK public holidays, and 9.00am to 2.00pm on Saturdays.

Cannot fix a recurring problem.

Try unplugging your machine from the mains power, wait at least

10 seconds, then switch the power back on again. If the fault still recurs, call the Helpline.