Alliance Laundry Systems 9001889R7 manual Chemical Hold Feature

Chemical Hold Feature

Chemical supply injection can be paused. Refer to Setup of Chemical Hold Feature.

Wash 5 Thermal Cool-Down

Immediately after a heat step, a temperature-controlled thermal cool-down may be programmed to prevent fiber shock from sudden cool-down.

Step XX Cycle XX

Wash

Thermal Cool-Down is Wash 5.

Step XX Cycle XX

Wash 5

Step XX Cycle XX 0°F (or 0°C)

Enter desired temperature for load to cool down to. Three digits must be used for temperature. If Fahrenheit, the valid temperature range is 80° – 200°F. If Celcius, valid temperature range is 25° – 90°C (example: 95°F).

Step XX Cycle XX 95°F

Step XX Cycle XX 0 hours

Step XX Cycle XX 1 hours 00 min

Programming

Enter time in minutes and press “Enter” (example: 5 min).

Step XX Cycle XX 1 hours 05 min

The “Heat” button is number 5.

Example: Heat up to 140°F with the time limit of 45 minutes.

Step XX Cycle XX

Heat

Step XX Cycle XX 0°F

Step XX Cycle XX 140°F

Step XX Cycle XX 0 hours

Step XX Cycle XX 0 hours 45 min

9001889 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 11