Alliance Laundry Systems 9001889R7 manual Programming

Page 8

Programming

Level : hyst 2"

Temp : hyst 3°F

Spin retries : 5

Address : 0

Enter to save ?

Program Cycle 00

Press “Enter” to set the hysteresis level (level at which water drops before it senses it must refill).

If English is selected for units, this value will be in inches. If Metric is selected for units, this value will be in cm.

Select between 1 to 9 cm or inches.

Press “Enter” to select the temperature hysteresis (level at which temperature drops before machine senses it must reheat).

If English is selected for units, this value will be in °F. If Metric is selected for units, this value will be in °C. Select 1 to 9 °C or °F.

Press the “Enter” button to set the spin retries. Select 1 to 9 spin retries.

Press “Enter” to set the network address of the machine. If this is not used, press “Enter”.

The address of the machine has to be set if you network the machine. Each machine should have a different address.

Fill in between 00 and 99.

Press “Enter” to finish the settings.

Press “Enter” to save the settings or press “Stop” to exit without saving.

6

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

9001889

Image 8
Contents Washer-Extractors Page 9001889 Contents Introduction Model IdentificationSetup of the Machine ProgrammingPress the Enter button to select options Programming Program Storing Mode Version of ControlExplanation of the Step Functions FillProgramming Wash Chemical Hold Feature Soak Spin Example Making a New Program Cycle Heat Wash 4 10/20 Cycle Cycle Cycle 51 Spin Cycle 51 0 min Cycle 51 8 min 30 sec End Edit a Cycle Change a Complete StepXxxxxxxx Changing the Time of a Step Press Enter to go to the next step Delete a Step Insert a Step Programming Delete a Cycle Reloading Previous Settings Cycle Count Reading Cycle CountCalibration of the Machine Speed Calibration Pre-Programmed Cycles Cycle Towels Light Soil Step Description Minsec Cycle Towels Medium Soil Step Description Minsec Cycle Blankets Warm Step Description Minsec Cycle Rinse and Spin Step Description Minsec Cycle Health Care Sheets Light Soil Step Description Minsec Cycle Health Care Towels Heavy Soil Step Description Minsec Cycle Health Care Cotton Blankets Step Description Minsec Cycle Health Care Personal No Bleach Step Description Minsec Cycle Health Care Pads Polyester Step Description Minsec Cycle Table Color Iron Step Description Minsec Cycle Table Color No Iron Step Description Minsec Pre-Programmed Cycles Visa No Iron Step Description Minsec Cycle Visa Color No Iron Step Description Minsec Cycle Shirt Color No Bleach Step Description Minsec Cycle Shirt Delicate Step Description Minsec Cycle Uniforms No Bleach Step Description Minsec Cycle Rags Heavy Soil Step Description Minsec Pre-Programmed Cycles Rewash/Reclaim Step Description Minsec Wash 1 18/3 32F 015 Drain 100 Pre-Programmed Cycles Energy Hot Step Description Minsec Cycle Energy Cold Step Description Minsec Pre-Programmed Cycles Normal 60C Step Description Minsec Cycle Gentle Cold Step Description Minsec Pre-Programmed Cycles Perm Press 60C Step Description Minsec Pre-Programmed Cycles Gentle 30C Step Description Minsec Inverter Drive Error Codes Indication During acceleration-If a current of more Indication