Alliance Laundry Systems 9001889R7 manual Calibration of the Machine

Page 30

Programming

Program Cycle 00

Total working hours : 0

level : 0.0 “ Enter to zero

Spin

XXX rpm

Reference x.xx

Calibration of the Machine

The _x__PV should reflect the size selected in earlier steps.

Turn key to Program Mode.

Press “Auxiliary”, “3”, “1”.

The total hours the machine was running will be displayed.

Press “Advance” and screen will show total cycles. Press “Advance” to calibrate the water level sensor.

If the value is not zero, press “Enter” and the value will change to zero.

Press “Advance” to calibrate the motor.

The board will lock the door and let the motor spin at approximately 500 rpm (Firmware version 1.12 or higher). The rpm will increase on the display. If the machine reached approximately 500 rpm, the display will show a reference value.

After the reference value is shown, the machine will coast down to stop. When the machine stands still, the board will unlock the door.

28

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

9001889

Image 30

Contents Washer-Extractors Page 9001889 Contents Introduction Model IdentificationSetup of the Machine ProgrammingPress the Enter button to select options Programming Program Storing Mode Version of ControlExplanation of the Step Functions FillProgramming Wash Chemical Hold Feature Soak Spin Example Making a New Program Cycle Heat Wash 4 10/20 Cycle Cycle Cycle 51 Spin Cycle 51 0 min Cycle 51 8 min 30 sec End Edit a Cycle Change a Complete StepXxxxxxxx Changing the Time of a Step Press Enter to go to the next step Delete a Step Insert a Step Programming Delete a Cycle Reloading Previous Settings Cycle Count Reading Cycle CountCalibration of the Machine Speed Calibration Pre-Programmed Cycles Cycle Towels Light Soil Step Description Minsec Cycle Towels Medium Soil Step Description Minsec Cycle Blankets Warm Step Description Minsec Cycle Rinse and Spin Step Description Minsec Cycle Health Care Sheets Light Soil Step Description Minsec Cycle Health Care Towels Heavy Soil Step Description Minsec Cycle Health Care Cotton Blankets Step Description Minsec Cycle Health Care Personal No Bleach Step Description Minsec Cycle Health Care Pads Polyester Step Description Minsec Cycle Table Color Iron Step Description Minsec Cycle Table Color No Iron Step Description Minsec Pre-Programmed Cycles Visa No Iron Step Description Minsec Cycle Visa Color No Iron Step Description Minsec Cycle Shirt Color No Bleach Step Description Minsec Cycle Shirt Delicate Step Description Minsec Cycle Uniforms No Bleach Step Description Minsec Cycle Rags Heavy Soil Step Description Minsec Pre-Programmed Cycles Rewash/Reclaim Step Description Minsec Wash 1 18/3 32F 015 Drain 100 Pre-Programmed Cycles Energy Hot Step Description Minsec Cycle Energy Cold Step Description Minsec Pre-Programmed Cycles Normal 60C Step Description Minsec Cycle Gentle Cold Step Description Minsec Pre-Programmed Cycles Perm Press 60C Step Description Minsec Pre-Programmed Cycles Gentle 30C Step Description Minsec Inverter Drive Error Codes Indication During acceleration-If a current of more Indication