The Ports
The Access Point’s port are located on the back of the device.
Figure 3-2: Back View
Reset Button | There are two ways to reset the Access Point to the factory default configuration. Either press |
| the Reset button, for approximately ten seconds, or restore the defaults using the Access |
| Point's |
Ethernet | The Ethernet network port connects to Ethernet network devices, such as a switch or router |
| that may or may not support Power over Ethernet (PoE). |
Power | The Power port connects to the supplied power adapter. |
Chapter 3: Getting to Know the
port: the connection point on a computer or networking device used for plugging in cables or adapters
IMPORTANT: Resetting the Access Point will erase all of your settings (including wireless security, IP address, and SSID) and replace them with the factory defaults. Do not reset the Access Point if you want to retain these settings.
8
The Ports