Linksys WAP200RF manual Connecting the Wireless-G Access Point, Overview, Connection

Page 16

Wireless-G Access Point with Power Over Ethernet and Rangebooster

Chapter 4: Connecting the Wireless-G Access Point

Overview

This chapter explains how to place and connect the Access Point.

Depending on your application, you might want to set up the device first before mounting the device. Refer to “Chapter 5: Setting Up the Wireless-G Access Point”.

hardware: the physical aspect of computers, telecommunications, and other information technology devices.

Connection

1.

Connect your Ethernet network cable to your network router or switch. Then connect the other end of the

 

 

 

network cable to the Access Point’s Ethernet port.

 

 

2.

If you are using Power Over Ethernet (POE), proceed to the following section, “Placement Options.”

 

 

 

If you are not using POE, then connect the included power adapter to the Access Point’s Power port. Then plug

 

 

 

the power adapter into an electrical outlet. The LEDs on the front panel will light up as soon as the Access

 

 

 

Figure 4-1: Connect the Ethernet Cable

 

Point powers on.

Proceed to the following section, “Placement Options.”

Figure 4-2: Connect the Power

Chapter 4: Connecting the Wireless-G Access Point

10

Overview

Image 16 Linksys WAP200RF manual Connecting the Wireless-G Access Point, Overview, Connection
Contents User Guide How to Use this User Guide Copyright and TrademarksTable of Contents Appendix B Wireless Security Appendix a TroubleshootingFrequently Asked Questions Example of a Simple Wireless Network List of Figures20 Security Monitor Basic Settings Introduction WelcomeWhat’s in this User Guide? Introduction What’s in this User Guide? Network Topology Planning Your Wireless NetworkRoaming Network Layout Example of a simple wireless network Getting to Know the Wireless-G Access Point LEDsAccess Point’s port are located on the back of the device PortsDesktop Placement and Antenna Setup Antennas and PositionsOverview Connecting the Wireless-G Access PointConnection Stand Option Placement OptionsWall-Mount Option Setting Up the Wireless-G Access Point Accessing the UtilityWireless SetupNavigating the Utility Administration AP ModeSecurity Monitor Status Configuring the Wireless-G Access Point Setup Basic Setup TabBasic Setup Network SetupSetup Time Tab TimeWireless Basic Wireless Settings Tab Basic SettingsWireless Wireless Security Tab Wireless SecurityWPA-Personal aka WPA-PSK WPA2-PersonalWPA2-Personal Mixed WPA-EnterpriseWPA2-Enterprise WPA2-Enterprise MixedDisable RadiusWireless Wireless Connection Control Tab Wireless Connection ControlWireless Client List Connection ControlWireless Advanced Wireless Settings Tab Advanced SettingsWireless Vlan & QoS Tab VlanQoS AP Mode Tab MAC Address18 Wireless Repeater Mode 19 Wireless Bridge Mode Wireless Security Monitor Security Monitor Basic Settings TabSecurity Monitor Accounts Security Monitor Event Log Tab Mail NotificationSyslog Notification Administration Management Tab Web AccessLocal AP Password ManagementSnmp IdentificationAdministration Log Tab LogEmail Alert Notification Queue LengthAdministration Factory Default Tab Administration Firmware Upgrade TabFactory Default Firmware UpgradeAdministration Reboot Tab Administration Config Management TabReboot Config ManagementInformation Status Local Network TabLocal Network Status Wireless Tab Wireless NetworkWired WirelessStatus System Performance Tab System PerformancePage Appendix a Troubleshooting Frequently Asked QuestionsWhat Ieee 802.11g features are supported? What is the ISM band? Does the Access Point function as a firewall? Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Appendix B Wireless Security Page Appendix C Upgrading Firmware Shared Resources Appendix D Windows HelpNetwork Neighborhood/My Network Places Appendix E Glossary Appendix E Glossary Appendix E Glossary Appendix E Glossary Appendix E Glossary Appendix F Specifications 802.11F Wireless RoamingDhcp Client 11g 14 dBm11.g 54Mbps@ -72dBm, 11.b 11Mbps@ -85dBM SecuritySuspicious network events Wireless Security MonitorCertification Appendix G Warranty Information Limited WarrantyAppendix H Regulatory Information Appendix H Regulatory Information Appendix H Regulatory Information Appendix H Regulatory Information Appendix H Regulatory Information Appendix H Regulatory Information Appendix H Regulatory Information Need to contact Linksys? Appendix I Contact InformationInformation section in this Guide