Linksys EG0801SK manual Appendix, Sharing Your Files and Printers, Overview, Enabling File Sharing

Page 27
Note: If you are only using your PC to access the Internet, it is highly recommended that you create pass- words for your shares.

Instant Gigabit Series

15.Once you are at the Windows desktop, double-click on the Network Neighborhood icon. You should see an icon for the entire network and the names of the other PCs on the network. Open the Entire Network icon.

•If you can see your computer along with all the other computers on the network in Network Neighborhood, then the Windows 95 net- work configuration is complete. Continue on the Sharing Your Files and Printers section if you want data from your PC to be available to others on the network.You may stop here, however, if you wish to con- figure File and Printer Sharing at a later time.

•If you don't see anything at all in Network Neighborhood, press the F5 key on your keyboard a few times to refresh the screen. If that doesn’t work, go to the Troubleshooting section.

•If you only see your own computer in Network Neighborhood, skip to the Troubleshooting section.

•If you see all computers on the network except yours, press the F5 key a few times. If, after a minute or so, you still can’t see your own PC, see the Troubleshooting section.

•If you only see computers that are running the same operating system as you and you don’t see any others, go to the Troubleshooting section.

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

Appendix

Sharing Your Files and Printers

Overview

By sharing your files and printers, other PCs on your network will be able to access the resources on your PC.

Before sharing your files and printers, you should prepare your computer to be used with any file servers that may be on the network. If you are not using Windows 95 or Windows 98 with an NT or NetWare file server, or if you are not sure if you have a file server, continue below.

If you are using a NetWare or NT file server, refer to the Novell NetWare 3.x Client Setup for Windows 95 or 98 or Windows 95 or 98 Client for Windows NT section, for client setup.

Enabling File Sharing

1.Double-click your My Computer icon. A window of available disk drives will appear.

2.Using your right mouse button, click once on the drive or folder that you want to make available to other users.

3.Click on Sharing, followed by the Sharing tab. Click on Share As.

4.In the Share Name box, enter a name for the drive or folder you are sharing. This can be any drive on your PC—floppy drive, hard drive, CD drive, zip drive, etc.

5.Decide on the type of access that you want to give other users.

•Read-Only access allows other users to view the files on the selected drive.

•Full access allows other users to create,

change, or delete files on the selected drive.

• Depends on Password allows other users to have Read-Only and/or Full access to the selected drive, depending on the password that you decide to give them.

47

48

Page 26 Page 28
Image 27
Page 26 Page 28
Contents EtherFast 10/100/1000 +1 Workgroup GigaSwitch Starter Kit Copyright & Trademarks Contents Introduction Your EtherFast 10/100/1000 8+1 Workgroup GigaswitchFeatures Package Contents10/100/1000 Workgroup GigaSwitch’s Front Panel 10/100/1000 Workgroup GigaSwitch’s Rear PanelGigaSwitch PowerRJ-45 Port Switches Versus HubsPlanning Your Network LEDsWhere to Install the Instant Gigabit Network Adapter Installing The Instant Gigabit Network Adapter Installing the Network Card & CablingRemove your computers outside cover Connecting Your Hardware Together and Booting Up Installing The Workgroup GigaswitchConnecting Computers To Your Switch Uplinking to Other Switches and HubsInstalling the Drivers for Windows Tips on Switching Your NetworkVersion a Version B also known as OSR2 Installing the Driver in Windows 95 Version B Installing the Network Adapter’s Driver Instant Gigabit Series Installing the Network Adapter’s Drivers Installing the Drivers for Windows MillenniumInstant Gigabit Series Windows NT 4.0 Installation & Setup Installing NT Networking and the Network Adapter Driver Instant Gigabit Series Page Instant Gigabit Series \i386 Installing the Drivers for Windows Completing the Found New Hardware Wizard dialog box will Advanced Properties Configuring The Instant Gigabit Network Adapter Configuring the Adapter for Windows 95, 98, and MillenniumConfiguration tab Click on Enabling File Sharing AppendixSharing Your Files and Printers OverviewEnabling Printer Sharing Installing the Driver in Windows 95 Version aStarting Over in Windows 95, 98, or Millennium NetWare portion of your Windows setup is completeInstant Gigabit Series Starting Over in Windows Manually Installing the Network Components in Windows Client for Microsoft Networks Click on Start, Settings, then Control PanelIPX/SPX-compatible Protocol NetBEUIInstalling and Configuring Wake-On-LAN Motherboard SupportAbout Plug-and-Play PCI Technology Troubleshooting Linux, Open Source and Beta Operating SystemsTwisted-Pair Cabling Network Neighborhood is Empty You receive Dhcp Errors in WindowsGlossary Instant Gigabit Series Instant Gigabit Series Instant Gigabit Series Specifications for EG1032 SpecificationsEnvironmental Specifications for EG0801WInformation Warranty InformationTech Support and RMA Issues Fax Contact InformationT p / / w w w. l i n k s y s . c o m

EG0801SK specifications

The Linksys EG0801SK is an advanced 8-port Ethernet switch designed to provide high-performance networking solutions for small to medium-sized enterprises, home offices, or any environment requiring reliable connectivity. Combining speed, performance, and versatility, this switch is an essential component for users looking to expand their local network efficiently.

The EG0801SK operates on a non-blocking architecture, ensuring that each port can handle consistent data transfer rates without interference. This is crucial for environments where multiple devices are connected simultaneously, as it guarantees minimal latency and efficient bandwidth utilization. With support for 10/100/1000 Mbps speeds, the switch is fully compatible with various devices, including computers, printers, and IP cameras, facilitating smooth communication across the network.

One of the standout features of the Linksys EG0801SK is its switch fabric that offers a high throughput. This means that it can handle burst traffic without any drops, ensuring that data-heavy applications can run uninterrupted. With Auto-MDI/MDIX support, users need not worry about the type of cables used; the switch automatically detects and adjusts, simplifying installation processes and reducing setup time.

In addition to its performance capabilities, the EG0801SK incorporates energy-efficient technologies that help reduce power consumption. The device uses energy-saving features such as "Green Ethernet," which adjusts power usage according to the number of connected devices and their respective activity levels. This makes the EG0801SK an environmentally friendly option, appealing to businesses looking to reduce their carbon footprint.

The sleek design of the Linksys EG0801SK allows it to fit seamlessly into any office environment, whether mounted on a wall, placed on a desk, or incorporated into a server rack. The switch is also equipped with LEDs for port status monitoring, providing users with real-time insights into connectivity and operation status.

In conclusion, the Linksys EG0801SK is a robust, feature-rich Ethernet switch that stands out due to its performance, reliability, and energy efficiency. It is designed to meet the demands of today's networking needs while ensuring ease of use and maintenance, making it an ideal choice for any networking environment.
Top Page Image Contents