Linksys EG0801SK manual Troubleshooting, Linux, Open Source and Beta Operating Systems

Page 35

Instant Gigabit Series

Linux, Open Source and Beta Operating Systems

Linksys does not provide technical support for Linux, BSD, or other freeware and open source operating systems. Although many Linksys products have been proven to perform well under Linux and other freeware OSes, technical support for setup and troubleshooting is not provided. For information on where to find device drivers and setup instructions for Linux and other freeware OSes, visit the support pages and FAQ files on the Linksys website at www.linksys.com.

Linksys does not provide technical support for Beta operating systems.

Twisted-Pair Cabling

There are different grades, or categories, of twisted-pair cabling. Category 5e is the most reliable and is highly recommended (and is required for Gigabit connections). Category 3 is a good second choice. Straight-through cables are used for connecting computers to a hub. Crossover cables are used for con- necting a hub to another hub (there is an exception: some hubs have a built-in uplink port that is crossed internally, which allows you to link or connect hubs together with a straight-through cable instead).

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

Troubleshooting

This section provides possible solutions to problems regarding the installation and operation of the Instant Gigabit Network Adapter. If you can’t find an answer here, check the Linksys website at www.linksys.com.

s

1.Windows does not detect the Instant Gigabit Network Adapter installed, or it attempts to reinstall the Network Adapter each time you restart your PC.

You might not have inserted the PCI card correctly or securely into the appropriate slot of your computer. Make sure that the card is securely inserted in the appropriate slot.

Insert your card into an alternate PCI slot.

You may have previously aborted a new hardware setup. Go to the Starting Over in Windows 95, 98, Millennium or 2000 section.

The motherboard in your system might not be Plug-and-Play compatible, or your PC’s Plug-and-Play settings may not be enabled, or the motherboard may have Plug-and-Play options not supported by Windows 95/98. If you are not sure, contact your PC’s manufacturer.

2.Windows can’t locate the driver for the Instant Gigabit Network Adapter.

You may have inserted the wrong diskette into your PC’s drive.

The diskette may be defective or files may be missing. Make sure the disk has a few files in a:\ starting with EG10 or a folder called Win95 or Win98.

3.The Windows Logon screen doesn’t appear after you restart your computer.

Click on Start, Shut Down, then Close All Programs and Logon as a Different User, (in Windows 98, select Log Off). If this doesn’t solve the problem, your PC’s manufacturer may have disabled Windows’ networking. Contact your computer’s manufacturer for help.

4.After entering a username and password, a window appears that reads, “No Domain Server could be found to validate your Username and Password.”

Click on Start, Settings, Control Panel. Double-click on Network. Click on the Configuration tab. Under The Following Network Components are Installed box, highlight Client for Microsoft Networks and click on the Properties button. Once you are in the Client For Microsoft Networks Properties window, make sure that Log on to Windows NT Domain is unchecked. Once you have made sure that it is unchecked, click on the OK button and restart your computer.

63

64

Image 35
Contents EtherFast 10/100/1000 +1 Workgroup GigaSwitch Starter Kit Copyright & Trademarks Contents Introduction Your EtherFast 10/100/1000 8+1 Workgroup GigaswitchFeatures Package Contents10/100/1000 Workgroup GigaSwitch’s Front Panel 10/100/1000 Workgroup GigaSwitch’s Rear PanelGigaSwitch PowerRJ-45 Port Switches Versus HubsPlanning Your Network LEDsWhere to Install the Instant Gigabit Network Adapter Remove your computers outside cover Installing The Instant Gigabit Network AdapterInstalling the Network Card & Cabling Connecting Your Hardware Together and Booting Up Installing The Workgroup GigaswitchConnecting Computers To Your Switch Uplinking to Other Switches and HubsVersion a Version B also known as OSR2 Installing the Drivers for WindowsTips on Switching Your Network Installing the Driver in Windows 95 Version B Installing the Network Adapter’s Driver Instant Gigabit Series Installing the Network Adapter’s Drivers Installing the Drivers for Windows MillenniumInstant Gigabit Series Windows NT 4.0 Installation & Setup Installing NT Networking and the Network Adapter Driver Instant Gigabit Series Page Instant Gigabit Series \i386 Installing the Drivers for Windows Completing the Found New Hardware Wizard dialog box will Advanced Properties Configuration tab Configuring The Instant Gigabit Network AdapterConfiguring the Adapter for Windows 95, 98, and Millennium Click on Enabling File Sharing AppendixSharing Your Files and Printers OverviewEnabling Printer Sharing Installing the Driver in Windows 95 Version aStarting Over in Windows 95, 98, or Millennium NetWare portion of your Windows setup is completeInstant Gigabit Series Starting Over in Windows Manually Installing the Network Components in Windows Client for Microsoft Networks Click on Start, Settings, then Control PanelIPX/SPX-compatible Protocol NetBEUIAbout Plug-and-Play PCI Technology Installing and Configuring Wake-On-LANMotherboard Support Twisted-Pair Cabling TroubleshootingLinux, Open Source and Beta Operating Systems Network Neighborhood is Empty You receive Dhcp Errors in WindowsGlossary Instant Gigabit Series Instant Gigabit Series Instant Gigabit Series Specifications for EG1032 SpecificationsEnvironmental Specifications for EG0801WInformation Warranty InformationTech Support and RMA Issues Fax Contact InformationT p / / w w w. l i n k s y s . c o m

EG0801SK specifications

The Linksys EG0801SK is an advanced 8-port Ethernet switch designed to provide high-performance networking solutions for small to medium-sized enterprises, home offices, or any environment requiring reliable connectivity. Combining speed, performance, and versatility, this switch is an essential component for users looking to expand their local network efficiently.

The EG0801SK operates on a non-blocking architecture, ensuring that each port can handle consistent data transfer rates without interference. This is crucial for environments where multiple devices are connected simultaneously, as it guarantees minimal latency and efficient bandwidth utilization. With support for 10/100/1000 Mbps speeds, the switch is fully compatible with various devices, including computers, printers, and IP cameras, facilitating smooth communication across the network.

One of the standout features of the Linksys EG0801SK is its switch fabric that offers a high throughput. This means that it can handle burst traffic without any drops, ensuring that data-heavy applications can run uninterrupted. With Auto-MDI/MDIX support, users need not worry about the type of cables used; the switch automatically detects and adjusts, simplifying installation processes and reducing setup time.

In addition to its performance capabilities, the EG0801SK incorporates energy-efficient technologies that help reduce power consumption. The device uses energy-saving features such as "Green Ethernet," which adjusts power usage according to the number of connected devices and their respective activity levels. This makes the EG0801SK an environmentally friendly option, appealing to businesses looking to reduce their carbon footprint.

The sleek design of the Linksys EG0801SK allows it to fit seamlessly into any office environment, whether mounted on a wall, placed on a desk, or incorporated into a server rack. The switch is also equipped with LEDs for port status monitoring, providing users with real-time insights into connectivity and operation status.

In conclusion, the Linksys EG0801SK is a robust, feature-rich Ethernet switch that stands out due to its performance, reliability, and energy efficiency. It is designed to meet the demands of today's networking needs while ensuring ease of use and maintenance, making it an ideal choice for any networking environment.