Linksys EG0801SK manual Planning Your Network, LEDs, RJ-45 Port, Overview, Switches Versus Hubs

Page 6

Instant Gigabit Series

Getting to Know the Instant Gigabit Network Adapter

Getting to Know the Instant Gigabit Network Adapter

LEDs

The LEDs

Link/Act The Link LED will illuminate when the card has been successfully connected to a network and flicker when there is network activity.

1000 The 1000 LED will illuminate when the card is operating at 1000Mbps. If the 1000 LED is not illuminated and the PC is pow- ered on, the card will have automatically determined that your net- work is operating at a slower speed and compensate accordingly.

The RJ-45 Port

The RJ-45 Port

The RJ-45 Port is where you will connect your network cabling.

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

Planning Your Network

Overview

Building a Gigabit network involves more topology rules in addition to the 10BaseT/100Base-TX network rules. These rules specify distance limitations and cabling specifications. Data loss, collisions, and other network problems causing down time are likely to occur if the rules below are not followed.

•Use UTP Category 5 (or better) Ethernet cabling with four pairs of wires and RJ-45 tips for all Fast Ethernet connections. Gigabit connections require Category 5e (or better).

•Use the chart below to position your switches, hubs and workstations.

From

To

Maximum Distance

Switch

Switch or Hub*

100 meters (328 feet) 1

 

 

 

Hub*

Hub*

5 meters (16.4 feet) 1

 

 

 

Switch or Hub

Workstation 1

100 meters (328 feet) 1

 

 

 

*Hub refers to any type of 100Mbps hub, including regular hubs and stackable hubs. A 10Mbps hub connected to another 10Mbps hub can span up to 100 meters (328 feet).

•No more than two hubs should be uplinked in a row in a Fast Ethernet net- work. A set of stacked hubs, which must be stacked with a stacking cable, counts as one hub or node on the network.

•In Fast Ethernet networks, your 10/100 Switch acts as a repeater, regener- ating data signals before passing them on to the next device. Passive hubs do not function as repeaters.

Switches Versus Hubs

Your Workgroup GigaSwitch boosts your network performance several times over, conserving your time, money and resources. The scalability of your Switch, its full duplex data transfer and dedicated bandwidth all contribute to maximizing efficiency in your Fast Ethernet network.

Your Switch’s 10/100 feature gives you a key advantage over other forms of networking by upgrading speed-critical network segments to 100Mbps while allowing existing 10BaseT networks to operate with the Switch. Allowing 10BaseT and 100BaseTX hardware speeds to run alongside each other elimi-

5

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents EtherFast 10/100/1000 +1 Workgroup GigaSwitch Starter Kit Copyright & Trademarks Contents Package Contents Your EtherFast 10/100/1000 8+1 Workgroup GigaswitchFeatures IntroductionPower 10/100/1000 Workgroup GigaSwitch’s Rear PanelGigaSwitch 10/100/1000 Workgroup GigaSwitch’s Front PanelLEDs Switches Versus HubsPlanning Your Network RJ-45 PortWhere to Install the Instant Gigabit Network Adapter Installing The Instant Gigabit Network Adapter Installing the Network Card & CablingRemove your computers outside cover Uplinking to Other Switches and Hubs Installing The Workgroup GigaswitchConnecting Computers To Your Switch Connecting Your Hardware Together and Booting UpInstalling the Drivers for Windows Tips on Switching Your NetworkVersion a Version B also known as OSR2 Installing the Driver in Windows 95 Version B Installing the Network Adapter’s Driver Instant Gigabit Series Installing the Drivers for Windows Millennium Installing the Network Adapter’s DriversInstant Gigabit Series Windows NT 4.0 Installation & Setup Installing NT Networking and the Network Adapter Driver Instant Gigabit Series Page Instant Gigabit Series \i386 Installing the Drivers for Windows Completing the Found New Hardware Wizard dialog box will Advanced Properties Configuring The Instant Gigabit Network Adapter Configuring the Adapter for Windows 95, 98, and MillenniumConfiguration tab Click on Overview AppendixSharing Your Files and Printers Enabling File SharingInstalling the Driver in Windows 95 Version a Enabling Printer SharingNetWare portion of your Windows setup is complete Starting Over in Windows 95, 98, or MillenniumInstant Gigabit Series Starting Over in Windows Manually Installing the Network Components in Windows NetBEUI Click on Start, Settings, then Control PanelIPX/SPX-compatible Protocol Client for Microsoft NetworksInstalling and Configuring Wake-On-LAN Motherboard SupportAbout Plug-and-Play PCI Technology Troubleshooting Linux, Open Source and Beta Operating SystemsTwisted-Pair Cabling You receive Dhcp Errors in Windows Network Neighborhood is EmptyGlossary Instant Gigabit Series Instant Gigabit Series Instant Gigabit Series Specifications Specifications for EG1032Specifications for EG0801W EnvironmentalContact Information Warranty InformationTech Support and RMA Issues Fax InformationT p / / w w w. l i n k s y s . c o m

EG0801SK specifications

The Linksys EG0801SK is an advanced 8-port Ethernet switch designed to provide high-performance networking solutions for small to medium-sized enterprises, home offices, or any environment requiring reliable connectivity. Combining speed, performance, and versatility, this switch is an essential component for users looking to expand their local network efficiently.

The EG0801SK operates on a non-blocking architecture, ensuring that each port can handle consistent data transfer rates without interference. This is crucial for environments where multiple devices are connected simultaneously, as it guarantees minimal latency and efficient bandwidth utilization. With support for 10/100/1000 Mbps speeds, the switch is fully compatible with various devices, including computers, printers, and IP cameras, facilitating smooth communication across the network.

One of the standout features of the Linksys EG0801SK is its switch fabric that offers a high throughput. This means that it can handle burst traffic without any drops, ensuring that data-heavy applications can run uninterrupted. With Auto-MDI/MDIX support, users need not worry about the type of cables used; the switch automatically detects and adjusts, simplifying installation processes and reducing setup time.

In addition to its performance capabilities, the EG0801SK incorporates energy-efficient technologies that help reduce power consumption. The device uses energy-saving features such as "Green Ethernet," which adjusts power usage according to the number of connected devices and their respective activity levels. This makes the EG0801SK an environmentally friendly option, appealing to businesses looking to reduce their carbon footprint.

The sleek design of the Linksys EG0801SK allows it to fit seamlessly into any office environment, whether mounted on a wall, placed on a desk, or incorporated into a server rack. The switch is also equipped with LEDs for port status monitoring, providing users with real-time insights into connectivity and operation status.

In conclusion, the Linksys EG0801SK is a robust, feature-rich Ethernet switch that stands out due to its performance, reliability, and energy efficiency. It is designed to meet the demands of today's networking needs while ensuring ease of use and maintenance, making it an ideal choice for any networking environment.
Top Page Image Contents