Miele G 7883 installation instructions Thermo switch, Frequently asked questions

Frequently asked questions

Thermo switch

This machine has a resettable heater limiter which will shut off the elements in the event of over-heating. This could be caused for example, if large articles cover the heating elements or if the filters in the wash cabinet are blocked.

If the following fault shows: F01 - F03, F18, F19, F27 (Water in the wash

cabinet is not heated, the program cycle takes too long). Please proceed as follows.

￿Remove the cause of the problem.

￿Remove the service plinth.

￿Press the reset button on the temperature sensor on the right side.

If this switch trips repeatedly, contact the Miele Technical Service Department.

59