Manuals / Miele / Household Appliance / Plumbing Product

Miele G 7883 installation instructions Rinse Aid, Adding rinse aid

Models: G 7883

1 72

Download 72 pages 54.95 Kb

Page 16

Image 16

Rinse Aid

Adding rinse aid

Rinse aid is not used in laboratory glassware cleaning applications.

If rinse aid is required, the rinse aid dosage must be activated with assistance from Miele Technical Service.

Rinse aid (e.g., MieleClear) is filled in the storage container, and the selected dose is then dispensed automatically. The rinse aid reservoir holds approximately 180 ml.

Inadvertently filling the rinse aid reservoir with detergent will damage the machine. Be sure only to use rinse aid in the rinse aid reservoir.

Open the washer door.

Unscrew the reservoir cap.

Pour enough rinse aid into the reservoir so that the level indicator (see arrow) is dark. Use a funnel if necessary.

Replace and tighten the reservoir cap.

Wipe up any spilled rinse aid, to prevent over sudsing during the next wash cycle.

Page 16

Image 16

Miele G 7883 installation instructions Rinse Aid, Adding rinse aid

Contents

Laboratory Glassware Washer G Operating and Installation Instructionsen - US, CA Contents Contents Programming functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 The following instructions apply to all programming functions:. . . . . . . . . . . . . . . 34 To access the programming mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Saving to memory and exiting the programming mode . . . . . . . . . . . . . . . . . . 34 Exiting the programming mode without saving . . . . . . . . . . . . . . . . . . . . . . . . 34 DOS 1 liquid detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Setting the detergent dosage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Priming the dosage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 DOS 3 neutralizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Setting the neutralizer dosage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Priming the dosage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Changing program parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 How to change the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Changing the holding time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Restoring the factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Setting the time and date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Data transfer optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Routine checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Thermo switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 INSTALLATION INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Take care when handling processing chemicals detergents, softeners, neutralizers, etc.. These may contain irritant or corrosive ingredients. Do not use organic solvents as these could cause an explosion. Wear protective gloves and goggles. With all chemical agents the manufacturer’s safety conditions must be observedIMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Please note the following symbols on the machineAccessories SAVE THESE INSTRUCTIONSGuide to the lab washer Guide to the lab washer a Connection for optionalStandard model Description of the machineIntended application: Laboratory equipment Opening and closing the door Electric door lockTo open the door To close the doorSetting the water softener Water softenerfactory setting SettingsWater softener Filling the salt reservoir Water softenerSalt indicator Water softenerRinse Aid Adding rinse aidSetting the rinse aid dosage Rinse aid indicator lightRinse Aid Neutralizing agent Adding neutralizerNeutralizer indicator light Neutralizing agentUsing powdered detergent DetergentAdding detergent Liquid detergentLoad the detergent into the compartment DetergentSnap the cover closed Loading the machine Loading the machine Loading the machinePrepare items before loading Special preparations before operating the machineAdjusting the upper basket Spring adapter for the water connectionTo adjust the upper basket Loading the machineLaboratory equipment Loading the machineLoading the machine Upper basket OFor various inserts Lower basket ULoading the machine E Injector wagonO Injector wagon For narrow necked glasswareStarting a program Turning onSelecting the optional drying function Program sequence display End of a program Turning offCanceling a program Program guide Program guide Program sequenceProgramming functions To access the programming modeSaving to memory and exiting the programming mode Exiting the programming mode without savingDOS 1 liquid detergent Setting the detergent dosageProgramming functions StepDOS 3 neutralizer Setting the neutralizer dosageProgramming functions StepBuzzer Programming functionsChanging program parameters Adjustable temperature rangeAdjustable holding time range How to change the temperature StepRestoring the factory settings Programming functionsChanging the holding time StepSetting the time and date Programming functionsData transfer optional Maintenance Routine checksCleaning and Care Cleaning the filters in the wash cabinetCleaning and Care Cleaning the fine, flat and micro-finefiltersCleaning and Care Cleaning the spray armsRemoving the spray arms Cleaning the drain pump and non-returnvalve Cleaning and CareCleaning and Care Cleaning the water inlet filtersCleaning the filters Cleaning the control panel Cleaning the exteriorCleaning the wash cabinet Cleaning the door sealBaskets and inserts Cleaning and CareFrequently asked questions Possible faultSolution What ifFrequently asked questions What ifFrequently asked questions What ifFrequently asked questions What ifFrequently asked questions What ifFrequently asked questions What ifFrequently asked questions Possible faultSolution What ifFrequently asked questions Possible faultSolution What ifFrequently asked questions Possible faultSolution What ifThermo switch Frequently asked questions1-800-565-6435service@miele.ca After Sales Service1-800-991-9380techserv@mieleusa.com INSTALLATION INSTRUCTIONS Installation Undercounter installationProtecting the countertop InstallationPositioning and securing the machine Cover plate protects the countertopTHIS APPLIANCE MUST BE GROUNDED Electrical connectionGrounding connection Connecting the water inlet PlumbingPlease also refer to the installation diagram PlumbingDI Connection pressurized PlumbingDI connection unpressurized optional Drainage PlumbingEnglish Technical dataMetric Disposal of the packing materials Caring for the environmentDisposal of an old appliance Page Alteration rights reserved / M.-Nr.07 158 260 /