Programming functions
Setting the time and date
The date and time are set in the serial interface (optional accessory). This information appears in the print log.
The date and time can be changed, e.g., from daylight saving to standard time.
Use the program selector to activate the desired time and date:
1 o'clock position: Calendar day 01 - 31
2 o'clock position: Month | 01 - 12 | |
3 o'clock position: Year | 00 | - 99 = 2000 - 2099 |
4 o'clock position: Hours | 00 | - 23 |
5 o'clock position: Minutes | 00 | - 59 |
When level E34 is selected without an activated serial interface, a
Step | Display / Result |
Press and hold the "Drying" button until E34 | E34 |
appears in the display. |
|
|
|
Wait approximately 30 sec before the next step. | The control unit retrieves the |
| currently stored values. |
Switch the program selector to the position for the 10 value you wish to change, e.g., to the 4 o'clock position to set the hour.
Press and hold the "Display" button until the | 11, the hour is changed. |
required value appears in the display, e.g., 1 x. |
|
|
|
Wait approximately 30 sec before turning off the | The updated values are |
machine. | transmitted to the serial |
| interface. |
Once the values are saved and you have exited the programming mode, the updated values are transmitted to the interface. Therefore wait about 30 seconds before switching off the machine.
40
