Manuals / Miele / Household Appliance / Plumbing Product

Miele G 7883 installation instructions Plumbing, Please also refer to the installation diagram

Models: G 7883

1 72

Download 72 pages 54.95 Kb

Page 66

Image 66

Please also refer to the installation diagram.

Plumbing

–Connect the intake hose for the steam condenser (without water safeguard) to the cold water faucet.

–See the next page for how to connect the DI water line.

–Water valves with 3/4 inch thread are to be provided on site. They should be easily accessible, because the water supply will need to be turned off when not in use.

–The inlet hoses are approx. 5 ½ ft

(1.7 m) long pressure hoses with

3/4 inch thread. Do not remove the water inlet filters in the threads.

–Install the large surface area filters (in the kit supplied with the machine) between the water valve and the water inlet hose (see illustration in "Cleaning the water inlet filters"). The large surface area filter for distilled water is made of stainless steel and can be recognized by the matte surface.

Do not cut or damage the inlet hose in any way.

Please also refer to the installation diagram.

Page 66

Image 66

Miele G 7883 installation instructions Plumbing, Please also refer to the installation diagram

Contents

Operating and Installation Instructions Laboratory Glassware Washer Gen - US, CA Contents Contents Programming functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 The following instructions apply to all programming functions:. . . . . . . . . . . . . . . 34 To access the programming mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Saving to memory and exiting the programming mode . . . . . . . . . . . . . . . . . . 34 Exiting the programming mode without saving . . . . . . . . . . . . . . . . . . . . . . . . 34 DOS 1 liquid detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Setting the detergent dosage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Priming the dosage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 DOS 3 neutralizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Setting the neutralizer dosage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Priming the dosage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Changing program parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 How to change the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Changing the holding time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Restoring the factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Setting the time and date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Data transfer optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Routine checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Thermo switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 INSTALLATION INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Take care when handling processing chemicals detergents, softeners, neutralizers, etc.. These may contain irritant or corrosive ingredients. Do not use organic solvents as these could cause an explosion. Wear protective gloves and goggles. With all chemical agents the manufacturer’s safety conditions must be observedIMPORTANT SAFETY INSTRUCTIONS Accessories IMPORTANT SAFETY INSTRUCTIONSPlease note the following symbols on the machine SAVE THESE INSTRUCTIONSGuide to the lab washer Guide to the lab washer a Connection for optionalDescription of the machine Standard modelIntended application: Laboratory equipment To open the door Opening and closing the doorElectric door lock To close the doorSetting the water softener Water softenerSettings factory settingWater softener Filling the salt reservoir Water softenerSalt indicator Water softenerRinse Aid Adding rinse aidRinse aid indicator light Setting the rinse aid dosageRinse Aid Neutralizing agent Adding neutralizerNeutralizer indicator light Neutralizing agentAdding detergent Using powdered detergentDetergent Liquid detergentDetergent Load the detergent into the compartmentSnap the cover closed Loading the machine Prepare items before loading Loading the machineLoading the machine Special preparations before operating the machineTo adjust the upper basket Adjusting the upper basketSpring adapter for the water connection Loading the machineLaboratory equipment Loading the machineFor various inserts Loading the machineUpper basket O Lower basket UO Injector wagon Loading the machineE Injector wagon For narrow necked glasswareTurning on Starting a programSelecting the optional drying function Program sequence display End of a program Turning offCanceling a program Program guide Program guide Program sequenceSaving to memory and exiting the programming mode Programming functionsTo access the programming mode Exiting the programming mode without savingProgramming functions DOS 1 liquid detergentSetting the detergent dosage StepProgramming functions DOS 3 neutralizerSetting the neutralizer dosage StepBuzzer Programming functionsAdjustable holding time range Changing program parametersAdjustable temperature range How to change the temperature StepChanging the holding time Restoring the factory settingsProgramming functions StepSetting the time and date Programming functionsData transfer optional Maintenance Routine checksCleaning and Care Cleaning the filters in the wash cabinetCleaning and Care Cleaning the fine, flat and micro-finefiltersCleaning the spray arms Cleaning and CareRemoving the spray arms Cleaning the drain pump and non-returnvalve Cleaning and CareCleaning the water inlet filters Cleaning and CareCleaning the filters Cleaning the wash cabinet Cleaning the control panelCleaning the exterior Cleaning the door sealBaskets and inserts Cleaning and CareSolution Frequently asked questionsPossible fault What ifFrequently asked questions What ifFrequently asked questions What ifFrequently asked questions What ifFrequently asked questions What ifFrequently asked questions What ifSolution Frequently asked questionsPossible fault What ifSolution Frequently asked questionsPossible fault What ifSolution Frequently asked questionsPossible fault What ifThermo switch Frequently asked questionsAfter Sales Service 1-800-565-6435service@miele.ca1-800-991-9380techserv@mieleusa.com INSTALLATION INSTRUCTIONS Installation Undercounter installationPositioning and securing the machine Protecting the countertopInstallation Cover plate protects the countertopElectrical connection THIS APPLIANCE MUST BE GROUNDEDGrounding connection Connecting the water inlet PlumbingPlease also refer to the installation diagram PlumbingPlumbing DI Connection pressurizedDI connection unpressurized optional Drainage PlumbingTechnical data EnglishMetric Caring for the environment Disposal of the packing materialsDisposal of an old appliance Page Alteration rights reserved / M.-Nr.07 158 260 /