Water softener
Before using the machine for the first time, the water softener should be programmed. The water needs to be softened to avoid calcium deposits on the items being cleaned and in the machine itself.
If the water supply is harder or softer than the factory setting (including below 4 gr/gal or 70 ppm), the setting will need to be changed. See "Setting the water softener".
–In order to function properly, the water softener requires a supply of reactivation salt.
–The cleaner must be correctly programmed to match the hardness of the tap water supply.
–Your local water authority can provide information about the hardness of the tap water in your area.
If the water hardness is known to fluctuate, always program for the highest value.
The
1 - 60 gr/gal or 20 - 1080 ppm.
It is useful to make a note of your water hardness so that you can provide the service technician with this information in the event of any service calls.
Please note the water hardness in the space provided here:
gr/gal or ppm
Setting the water softener
Use the On/Off button to switch off the machine.
Turn the program selector to .
Simultaneously press and hold the "Display" and "Start" buttons, while turning the machine on with the On/Off button.
The current program status P....
will appear in the display, and the "Fill/Drain" indicator will come on.
Press the "Drying" button once.
E01 will appear in the display.
Turn the program selector one switch position clockwise (to 1 o'clock).
The number 19 will appear in the display (this indicates the factory setting in gr/gal).
Press and hold the "Display" button until the required value appears in the display.
Please refer to the "Settings" table for detailed water hardness tables (water hardness in gr/gal and ppm).
Once the 60 setting has been reached, the counter begins again from 0.
Press "Start" .
SP will appear in the display.
Press "Start" again.
The setting you selected will now be stored in memory. The display light(s) will turn off.
The machine is now ready for use.
12
