Cleaning and Care
Cleaning the water inlet filters
To protect the water inlet faucet, filters are incorporated in the intake hose attached to the water supply. If the filters are soiled they must be cleaned to ensure sufficient water intake to the wash cabinet.
The plastic housing of the water connection contains electrical components and should not be submerged or run through water.
Cleaning the filters
Disconnect the machine from electricity (unplug it or "trip" the circuit breaker).
Close the water supply and unscrew the water inlet faucet.
Carefully remove the rubber seal.
Take out the filters with needle nose pliers.
Rinse the large area filter 1 and fine filter 2 under running water, and replace if necessary.
Return filters and seal. Make sure they are seated correctly.
Reconnect the hose to the water faucet, checking that it is not
Open the water supply.
Check for leaks.
47
