Installing The Instant Gigabit Network Adapter

Instant Gigabit Series

If you are already operating in a Gigabit environment, we suggest a configu- ration like the one shown below (Configuration B). Your Instant Gigabit Network Adapter would be installed in your file server, which would be attached to your Gigabit hub or switch, maximizing your file server’s band- width. The Workgroup GigaSwitch would be connected to one of the other Gigabit ports on your Gigabit switch or hub, acting like a bridge between the 1000Mbps section of your network and the 10/100 portion of your network.

Configuration B

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

Installing the EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit onto Your Network

Overview

Installing your Starter Kit will involve installing both the Adapter and the GigaSwitch. If you are integrating these items into an existing nework, some additional steps may be necessary involving settings for your existing equip- ment. Consult your Network Administrator for more information about how the Starter Kit will interface with your existing network components.

Installing The Instant Gigabit Network Adapter

Each Instant Gigabit Network Adapter is equipped with an RJ-45 port that automatically adjusts to either 10Mbps, 100Mbps, or 1000Mbps speeds, allow- ing your PC to attach to either Gigabit Ethernet, Fast Ethernet, or regular Ethernet network segments without additional hardware or software.

The card should only be used with twisted-pair cabling, such as 10BaseT, 100BaseTX, or 1000BaseT cabling. For best results, we recommend using Category 5e or better unshielded twisted-pair cabling although category 3 can be used for 10BaseT segments. Only Category 5e or better cable will work for Gigabit transfer. If you use the cable included in your Starter Kit, both your Adapter and Gigaswitch will operate at the maximum speed of your net- work. In any case, the cable that runs from your PC’s Instant Gigabit Network Adapter card to your network should not exceed 100 meters (328 feet).

Installing the Network Card & Cabling

1.Power off your PC and any peripheral equipment attached to it. Unplug your PC’s power cord. For suggestions on choosing the PC in which to install the Adapter, see the section called Planning Your Network.

2.Remove your computer's outside cover.

EG0801SK specifications

The Linksys EG0801SK is an advanced 8-port Ethernet switch designed to provide high-performance networking solutions for small to medium-sized enterprises, home offices, or any environment requiring reliable connectivity. Combining speed, performance, and versatility, this switch is an essential component for users looking to expand their local network efficiently.

The EG0801SK operates on a non-blocking architecture, ensuring that each port can handle consistent data transfer rates without interference. This is crucial for environments where multiple devices are connected simultaneously, as it guarantees minimal latency and efficient bandwidth utilization. With support for 10/100/1000 Mbps speeds, the switch is fully compatible with various devices, including computers, printers, and IP cameras, facilitating smooth communication across the network.

One of the standout features of the Linksys EG0801SK is its switch fabric that offers a high throughput. This means that it can handle burst traffic without any drops, ensuring that data-heavy applications can run uninterrupted. With Auto-MDI/MDIX support, users need not worry about the type of cables used; the switch automatically detects and adjusts, simplifying installation processes and reducing setup time.

In addition to its performance capabilities, the EG0801SK incorporates energy-efficient technologies that help reduce power consumption. The device uses energy-saving features such as "Green Ethernet," which adjusts power usage according to the number of connected devices and their respective activity levels. This makes the EG0801SK an environmentally friendly option, appealing to businesses looking to reduce their carbon footprint.

The sleek design of the Linksys EG0801SK allows it to fit seamlessly into any office environment, whether mounted on a wall, placed on a desk, or incorporated into a server rack. The switch is also equipped with LEDs for port status monitoring, providing users with real-time insights into connectivity and operation status.

In conclusion, the Linksys EG0801SK is a robust, feature-rich Ethernet switch that stands out due to its performance, reliability, and energy efficiency. It is designed to meet the demands of today's networking needs while ensuring ease of use and maintenance, making it an ideal choice for any networking environment.