Linksys EG0801SK manual Manually Installing the Network Components in Windows

Page 32

Instant Gigabit Series

5.Right-click on Linksys EG1032/EG1064 Instant Gigabit Network Adapter. A menu box should open (below).

6.First, choose Disable.

7.When asked if you want to Disable the device, click Yes.

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

8.Right-click on Linksys EG1032/EG1064 Instant Gigabit Network Adapter again. This time, select Uninstall. Click OK.

9.The Network Adapters category should be removed from the Device Manager listing.

10.Click the OK button, and restart your computer.

Manually Installing the Network Components in Windows 9

Image 32

Contents EtherFast 10/100/1000 +1 Workgroup GigaSwitch Starter Kit Copyright & Trademarks Contents Your EtherFast 10/100/1000 8+1 Workgroup Gigaswitch FeaturesPackage Contents Introduction10/100/1000 Workgroup GigaSwitch’s Rear Panel GigaSwitchPower 10/100/1000 Workgroup GigaSwitch’s Front PanelSwitches Versus Hubs Planning Your NetworkLEDs RJ-45 PortWhere to Install the Instant Gigabit Network Adapter Remove your computers outside cover Installing The Instant Gigabit Network AdapterInstalling the Network Card & Cabling Installing The Workgroup Gigaswitch Connecting Computers To Your SwitchUplinking to Other Switches and Hubs Connecting Your Hardware Together and Booting UpVersion a Version B also known as OSR2 Installing the Drivers for WindowsTips on Switching Your Network Installing the Driver in Windows 95 Version B Installing the Network Adapter’s Driver Instant Gigabit Series Installing the Drivers for Windows Millennium Installing the Network Adapter’s DriversInstant Gigabit Series Windows NT 4.0 Installation & Setup Installing NT Networking and the Network Adapter Driver Instant Gigabit Series Page Instant Gigabit Series \i386 Installing the Drivers for Windows Completing the Found New Hardware Wizard dialog box will Advanced Properties Configuration tab Configuring The Instant Gigabit Network AdapterConfiguring the Adapter for Windows 95, 98, and Millennium Click on Appendix Sharing Your Files and PrintersOverview Enabling File SharingInstalling the Driver in Windows 95 Version a Enabling Printer SharingNetWare portion of your Windows setup is complete Starting Over in Windows 95, 98, or MillenniumInstant Gigabit Series Starting Over in Windows Manually Installing the Network Components in Windows Click on Start, Settings, then Control Panel IPX/SPX-compatible ProtocolNetBEUI Client for Microsoft NetworksAbout Plug-and-Play PCI Technology Installing and Configuring Wake-On-LANMotherboard Support Twisted-Pair Cabling TroubleshootingLinux, Open Source and Beta Operating Systems You receive Dhcp Errors in Windows Network Neighborhood is EmptyGlossary Instant Gigabit Series Instant Gigabit Series Instant Gigabit Series Specifications Specifications for EG1032Specifications for EG0801W EnvironmentalWarranty Information Tech Support and RMA Issues FaxContact Information InformationT p / / w w w. l i n k s y s . c o m

EG0801SK specifications

The Linksys EG0801SK is an advanced 8-port Ethernet switch designed to provide high-performance networking solutions for small to medium-sized enterprises, home offices, or any environment requiring reliable connectivity. Combining speed, performance, and versatility, this switch is an essential component for users looking to expand their local network efficiently.

The EG0801SK operates on a non-blocking architecture, ensuring that each port can handle consistent data transfer rates without interference. This is crucial for environments where multiple devices are connected simultaneously, as it guarantees minimal latency and efficient bandwidth utilization. With support for 10/100/1000 Mbps speeds, the switch is fully compatible with various devices, including computers, printers, and IP cameras, facilitating smooth communication across the network.

One of the standout features of the Linksys EG0801SK is its switch fabric that offers a high throughput. This means that it can handle burst traffic without any drops, ensuring that data-heavy applications can run uninterrupted. With Auto-MDI/MDIX support, users need not worry about the type of cables used; the switch automatically detects and adjusts, simplifying installation processes and reducing setup time.

In addition to its performance capabilities, the EG0801SK incorporates energy-efficient technologies that help reduce power consumption. The device uses energy-saving features such as "Green Ethernet," which adjusts power usage according to the number of connected devices and their respective activity levels. This makes the EG0801SK an environmentally friendly option, appealing to businesses looking to reduce their carbon footprint.

The sleek design of the Linksys EG0801SK allows it to fit seamlessly into any office environment, whether mounted on a wall, placed on a desk, or incorporated into a server rack. The switch is also equipped with LEDs for port status monitoring, providing users with real-time insights into connectivity and operation status.

In conclusion, the Linksys EG0801SK is a robust, feature-rich Ethernet switch that stands out due to its performance, reliability, and energy efficiency. It is designed to meet the demands of today's networking needs while ensuring ease of use and maintenance, making it an ideal choice for any networking environment.