Alcatel Carrier Internetworking Solutions 1000 ADSL manual Bridged Service with Filtering

Page 46

Each time the PC starts up, it automatically broadcasts an IP address request. When the remote entity responds to this request, you are connected.

The following instructions to enable DHCP assume a Windows 95 operating system:

1.Start the PC and double-click the My Computer icon.

2.Open the Control Panel and double-click the Network icon.

3.In the Network window, select the Configuration tab.

4.Select TCP/IP Protocol - 3COM EtherLinkIII ISA.

5.Click Properties.

6.In the TCP/IP Properties window, select the IP Address tab.

7.Select Obtain an IP address automatically.

8.Click OK to close the TCP/IP Properties window.

9.Click OK to close the Network window.

10.Select yes when prompted to restart the PC.

After the PC is restarted, it acquires its own IP address from the server using

BOOTP/DHCP.

Bridged Service with Filtering

The 3EC 18202 DB version of the modem provides an IEEE 802.1D Transparent Databridge with administrative filtering capability on the bridge ports to reduce security risk and bandwidth requirements on the ADSL interface.

Filtering Function

The filtering applied to the bridge ports performs the following functions:

Blocks all multicast frames

Forwards IP and ARP broadcast frames

Forwards IP unicast frames

Multicast Traffic on Bridge Ports

The modem blocks all multicast traffic in both upstream and downstream directions. All multicast frames arriving on the Ethernet port are silently

Image 46
Contents Page Save These Important Safety Instructions Page Contents Modem Connections Troubleshooting Tips Getting Started Placement of Adsl High Speed ModemDelivery Check Wall-Mounting Option Table a If you mount Modem on Mark positions of holesFilter Installation Wall-Mounting InstructionsTable B Service Type Bridged ServiceDetermining Your Service Type Model NumberHardware Installation System Requirements10BASE-T Light Accessing Online ServicesPower/Sync Light Network Address AssignmentsPoint to Point Service Accessing Online Services Windows 95/Windows 98 Dial-Up Procedures Contents frame, select Free DownloadsInstalling Dial-Up Networking Software Windows 98 Only Select Start, Settings, Control Panel, NetworkClick on Communications in the Components list Configure the Connection Make New Connection Windows 95 ExampleVPN Server Field Windows 98 example Page Connect To Windows 98 Example Break the Connection Windows NT Dial-Up ProceduresAdd Point To Point Tunneling Protocol Network Window Select Network Protocol Window Remote Access Setup Window Configure Port Usage Window Dial-Up Networking Window Make the Connection Break the Connection ATM-25 Service ATMF-25 Light Description of Features Modem Connections General Network ArchitectureConnector Pinout Connectors on Adsl ModemSignal Name Power SupplyTable C. Connector Pinout PinVisual Indicators Visual Indicators Table D Meaning Name ColorSubscriber Line Interface Ethernet InterfaceMultiple PC Configuration Single PC ConfigurationStraight-Through Cable Layout Multiple PC Configuration Crossover Cable Layout ATMF-25 InterfaceNetwork Connections Virtual ConnectionsATM-Forum Interface Table E. Atmf VPI/VCI Values Parameter MeaningTable F. Ethernet Parameters Connection Bridged ConnectionsISP/Corporate Network Requirements VCIsTable G. Ethernet VPI/VCI Values Parameter Meaning MultiprotocolNumber of Machines Supported Table H. Ethernet ParametersFixed IP Address PC/Workstation ConfigurationPlug and Play Dynamic IP AddressFiltering Function Bridged Service with FilteringMulticast Traffic on Bridge Ports Broadcast Traffic on Bridge Ports Unicast Traffic on Bridge PortsIntroduction Point to Point Tunneling ConnectionsPPP/PPTP Network Establishing PPP/PPTP Connections Any ConnectionATM Channels over Multiple Remote Destinations Pptp Destination Table LAN Protocols Supported Number of PPP/PPTP Connections SupportedKnown Limitations One Tunnel Advanced ConfigurationsOverview Tunneling within a TunnelSubnetmask and Default Gateway Parameters IP ParametersDefault Netmask Sample ConfigurationsSingle PC Allocation Small WorkgroupAutomatic IP Parameter Distribution Advanced NetworksPing-of-Life Procedure Most TCP / IP packages support the ARP and Ping commandPing For example arp -a -NArp -a -N interface IP address Arp -d modem IP address -N interface IP addressArp -a any IP address 01-90-D0-00-01-FF Ping-to-Defaults ProcedurePing any IP address Accessing the Adsl Modem Interface Changing the Modem SettingsConfiguring the Browser Netscape NavigatorSave DefaultsApply AdvancedWelcome Basic ConfigurationInitial Setup BridgeIP Address User Defined Configuration TableNetmask/Subnet Mask BOOTP/DHCP Configuration Table Default GatewaySubnet Mask Address Advanced ConfigurationIP Address Table NetmaskIP Route Table Bridge ConfigurationAction Port States TableBridge Port EncapState Aging TableChannel ID Basic PPP/PPTP ConfigurationName Advanced PPP/PPTP Configuration HdlcSystem Overview Hdlc FramingRegulatory Information Safety StandardsEnvironmental Conditions Page For Canadian Modem Users Pour les Utilisateurs Canadiens de Modem AvertissementProblem Solution3EC 16389 Abaa Tczza