Alcatel Carrier Internetworking Solutions 1000 ADSL manual Wall-Mounting Option

Wall-Mounting Option

Part of the packaging is a wall-mounting template. If you want to mount the modem on a wall, cut the template out and use it as follows (see figure 1).

1. Use template to mark positions of holes as indicated in table A.

Table A.

If you mount the

modem on...

Mark positions of holes

Left side of corner

Right side of corner

Area of wall away from corner

A1 and A2

B1 and B2

Either A1 and A2 or B1 and B2

2.Drill the marked holes with a 6-mm (0.24-in.) diameter drill bit to a minimum depth of 35 mm (1.38 in.).

3.Insert the wall plugs in the drilled holes.

4.Insert the screws in the wall plugs and tighten them, leaving at least 3 mm (0.12 in.) protruding.

5.Position the modem over the upper screw (A1 or B1) and pull the box down until you hear a click.

6.Rotate the modem toward the lower screw (A2 or B2) and push it until you hear a click.