Alcatel Carrier Internetworking Solutions 1000 ADSL manual Remote Access Setup Window

10. Click OK to continue. This initiates configuration of the RAS.

Note:

You have completed the first part of the installation by adding PPTP as a remote protocol. The remaining steps configure RAS for PPTP.

11.In the Remote Access Setup Window (figure 11), add the new VPN ports to RAS by clicking Add. The Add RAS Device window appears (see figure 12).

Figure 11. Remote Access Setup Window

Figure 12. Add RAS Device Window

12.Each RAS Capable Device (also called a port) must be added individually. Double-click a port and click OK. The Remote Access Setup Window (refer to figure 11) returns.

13.Repeat steps 11 and 12 until all VPN ports are listed in the Remote Access Setup Window. Then proceed with step 14.

14.The ports are configured for dial-in only. To change this, select a port in the Remote Access Setup window and click Configure. The Configure Port Usage Window appears (see figure 13).