13.When the TCP/IP Properties window appears, click the IP Address tab.
14.If your service is DHCP, click the Obtain an IP address automatically radio button. If your service uses static addressing, press the Enter IP address radio button, and enter the IP address and subnet mask assigned to you by your service provider.
15.Restart your computer.
16.Turn on the modem by switching the on/off switch to .
Power/Sync Light
The Power/Sync light begins blinking. After about two minutes, the light should be solid green. If the light is not solid green, check the telephone line cable between the modem LINE connector and the phone jack. If this connection is secure and the Power/Sync light is not solid green, contact your service provider for assistance.
10BASE-T Light
The
Accessing Online Services
When your PC is started and your ADSL modem is switched on, a connection is automatically established with your online service. Through this connection, you can access the World Wide Web or your corporate network or other online services.
Network Address Assignments
Network addresses are either manually assigned (static addresses) or dynamically assigned. If the address is fixed, your PC must be configured with an IP address provided by your service provider. If the address is dynamic, your PC must be configured to use dynamic host configuration protocol (DHCP).
If you are not sure which network addressing method you are using, ask your service provider for this information.