Altinex MT101-115 Precautions / Safety Warnings, General, Installation, Cleaning, FCC Notice

Page 3

MULTITASKER

PRECAUTIONS / SAFETY WARNINGS

1

Please read this manual carefully before using your MT101-114/115/117. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT101-114/115/117and to prevent fire and shock hazards. Please read them carefully and heed all warnings.

1.1 GENERAL

Qualified ALTINEX service personnel or their authorized representatives must perform all service.

1.2 INSTALLATION

To prevent fire or shock, do not expose this unit to water or moisture. Do not place the unit in direct sunlight, near heaters or heat-radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components.

Handle your front panel carefully. Dropping or jarring can damage the unit. If the front panel is not used for an extended period, disconnect the power cord from the power outlet or turn off the main connection.

1.3 CLEANING

Unplug the MT101-114/115/117power cord before cleaning.

Clean surfaces with a dry cloth. Never use strong detergents or solvents such as alcohol or thinner. Do not use a wet cloth or water to clean the unit.

1.4 FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with instructions found herein, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.

400-0402-003

2

Image 3
Contents MT101-114/115/117 Table of Contents General Precautions / Safety WarningsInstallation CleaningTechnical Specifications MT101-114/115/117 GeneralMT101-114/115/117 Electrical KEY Number Locations Product DescriptionDiagram 1 Installation Instructions Application DiagramsSubroutines Diagram 2 Sample Matrix SetupMultiTasker Computer Control System AC Power Cord Before Opening the EnclosureOperation DisconnectKEY Programming POWER-UP SUB1 U0/U1Saving Card Configurations Identify Unit IDRS-232 Protocol RS-232 Connection 1 RS-232 CommunicationSET Description of CommandsRS-232 Commands VERIDUi RESDFB EFBRMC STA1STA0 12. WRBEEPn RateRATE= RATE=STXM BaudBAUD= TXRHelp Xyz27. @xyz TestClfc LED CommandsLEDn= LEDm-nRDK STAWRK KEY8= 8,108,0,0,0 Speakers VolumeKEY ClrkLock Unlk or UnlockRdsk RdlkWrlk ClrlkUplk ClrvkWRS Subroutine CommandsRDS ALL Subroutines are EmptyWRS=S Matrix FunctionsWait SUBClrs Subroutines are ClearedDFB VERSET RESTroubleshooting Guide Limited WARRANTY/RETURN Policies Contact Information Altinex PoliciesToll Free 1-800-ALTINEX