Motorola SBV5120 manual Setting Up a USB Driver in Windows Me

Introduction

Installation

Troubleshooting Glossary License

Setting Up a USB Driver in Windows Me

1Insert the SURFboard VoIP Cable Modem CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be inserted and read by the PC before you connect the VoIP cable modem to the PC.

2Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see “Cabling and Startup for a Single User” on page 8. A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:

3Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is successful, the following window is displayed. Otherwise, be sure the SURFboard VoIP Cable Modem CD-ROM is correctly inserted in your CD-ROM drive.

Although your SURFboard VoIP cable modem model number may be different than in the images in this guide, the procedure is the same.

4Click Finish to complete the installation.

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP in Windows 98 Second Edition, or Windows Me” on page 20.

SBV5120 VoIP Cable Modem User Guide 18