Advantek Networks AWN-MIMO-54RA user manual Setting of DLS indicates as follow

Page 38

The Setting of DLS indicates as follow:

1.Fill in the blanks of Direct Link with MAC Address of STA. The STA must conform to two conditions as follow:

Step1: Connect with the same AP that support DLS features.

Step2: Have to enable DLS.

2.Timeout Value represents that it disconnect automatically after some seconds. The value is integer. The integer must be between 0~65535. It represents that it always connects if the value is zero. Default value of Timeout Value is 60 seconds

37

Image 38

Contents 802.11g, 54Mbps Mimo PCI Wireless Adapter User’s Manual FCC Warning Revision History Contents Wireless LAN has Activity ACT data being sent Light Status DescriptionHardware Diagram Installation Procedure Adjust the antenna position Place the PC as high as possibleInstall the Driver & Utility Page Page Page Page For Windows Vista x86 & x64 bit Page Choose Properties Æ click Device Manager To setup Wireless Network in Windows Vista Operation System Choose Connect to a network Page Wireless Network Configuration Utility Configuration utilityProfile 2Link Status 3Site Survey Configure the Profile Network Type Authentication and Security Page 3 802.1x Setting-Certification Encryption ModeAn example for MD5 Authentication 4 802.1x Setting-CA Server Tunneled Authentication4Statistics Wireless Mode AdvancedPage Click WMM Enable Click Apply QoSPage Enable WMM Power Save Click WMM Power Save Enable. And Click Setting… buttonEnable DLS Direct Link Setup Click Direct Link Setup Enable. And Click Apply buttonSetting of DLS indicates as follow Link Setup Describe DLS Status as followPage 7About Troubleshooting What is the Ieee 802.11g standard? What does Ieee 802.11 feature support?