Advantek Networks AWN-MIMO-54RA user manual Hardware Diagram

Page 6

1.3 Hardware Diagram

[For Wireless PCI Adapter]

[For Wireless CardBus Adapter]

1.4Package Contents

One Wireless PCI or Cardbus adapter

Three external antennas (for PCI adapter)

One CD includes driver and user’s manual

1.5Before you start

You must have the requirements as follow,

A laptop computer / desktop PC with an available 32-bit Cardbus / PCI slot

At least a 300MHz processor and 32MB memory

Windows 98SE/ME/2000/XP/XP-64bit/Vista 32bit/Vista 64bit support

A CD-ROM drive

PCI / Cardbus controller properly installed

An IEEE802.11g or IEEE802.11b Access Point (for Infrastructure mode) or another IEEE802.11g or IEEE802.11b wireless adapter (for Ad-Hoc Networking Mode)

5

Image 6
Contents 802.11g, 54Mbps Mimo PCI Wireless Adapter User’s Manual FCC Warning Revision History Contents Wireless LAN has Activity ACT data being sent Light Status DescriptionHardware Diagram Installation Procedure Adjust the antenna position Place the PC as high as possibleInstall the Driver & Utility Page Page Page Page For Windows Vista x86 & x64 bit Page Choose Properties Æ click Device Manager To setup Wireless Network in Windows Vista Operation System Choose Connect to a network Page Wireless Network Configuration Utility Configuration utilityProfile 2Link Status 3Site Survey Configure the Profile Network Type Authentication and Security Page 3 802.1x Setting-Certification Encryption ModeAn example for MD5 Authentication 4 802.1x Setting-CA Server Tunneled Authentication4Statistics Wireless Mode AdvancedPage Click WMM Enable Click Apply QoSPage Enable WMM Power Save Click WMM Power Save Enable. And Click Setting… buttonEnable DLS Direct Link Setup Click Direct Link Setup Enable. And Click Apply buttonSetting of DLS indicates as follow Link Setup Describe DLS Status as followPage 7About Troubleshooting What is the Ieee 802.11g standard? What does Ieee 802.11 feature support?