Advantek Networks AWN-MIMO-54RA user manual

Page 11

STEP5: In Windows XP, there is a Windows Zero Configuration Tool for you to setup wireless adapter. You can choose to configure the adapter through the Microsoft Zero Configuration Tool or the Ralink Configuration Tool. It is recommended to choose the Ralink Configuration Tool for the adapter. Click Next to continue.

STEP6: If you need the adapter to operate with better performance, place choose Optimize for performance mode to enable the Tx Burst mode. Or you can choose Optimize for WiFi mode to run in standard wireless network.

10

Image 11

Contents 802.11g, 54Mbps Mimo PCI Wireless Adapter User’s Manual FCC Warning Revision History Contents Light Status Description Wireless LAN has Activity ACT data being sentHardware Diagram Installation Procedure Place the PC as high as possible Adjust the antenna positionInstall the Driver & Utility Page Page Page Page For Windows Vista x86 & x64 bit Page Choose Properties Æ click Device Manager To setup Wireless Network in Windows Vista Operation System Choose Connect to a network Page Configuration utility Wireless Network Configuration UtilityProfile 2Link Status 3Site Survey Configure the Profile Network Type Authentication and Security Page Encryption Mode 3 802.1x Setting-CertificationAn example for MD5 Authentication Tunneled Authentication 4 802.1x Setting-CA Server4Statistics Advanced Wireless ModePage QoS Click WMM Enable Click ApplyPage Click WMM Power Save Enable. And Click Setting… button Enable WMM Power SaveClick Direct Link Setup Enable. And Click Apply button Enable DLS Direct Link SetupSetting of DLS indicates as follow Describe DLS Status as follow Link SetupPage 7About Troubleshooting What is the Ieee 802.11g standard? What does Ieee 802.11 feature support?