Advantek Networks AWN-MIMO-54RA user manual Installation Procedure

Page 7

2. Installation Procedure

Note: If you have installed the Wireless Adapter LAN driver & utility before, please uninstall the old version first.

2.1 Install the Hardware

[For Wireless CardBus Adapter]

STEP1: To use the Wireless Cardbus Adapter with a computing device, the Wireless Cardbus Adapter must be equipped with an internal or external PCMCIA Card Type II or Type III slot.

STEP2: Please firmly insert the Wireless Cardbus Adapter into an available PCMCIA Card slot. PCMCIA Card slot is located on one side of the Laptop PC.

[For Wireless PCI Adapter]

STEP1: Turn off your computer and remove its cover

STEP2: Insert the PCI card to an available PCI slot firmly. Please refer to the illustration below:

6

Image 7

Contents 802.11g, 54Mbps Mimo PCI Wireless Adapter User’s Manual FCC Warning Revision History Contents Light Status Description Wireless LAN has Activity ACT data being sentHardware Diagram Installation Procedure Place the PC as high as possible Adjust the antenna positionInstall the Driver & Utility Page Page Page Page For Windows Vista x86 & x64 bit Page Choose Properties Æ click Device Manager To setup Wireless Network in Windows Vista Operation System Choose Connect to a network Page Configuration utility Wireless Network Configuration UtilityProfile 2Link Status 3Site Survey Configure the Profile Network Type Authentication and Security Page Encryption Mode 3 802.1x Setting-CertificationAn example for MD5 Authentication Tunneled Authentication 4 802.1x Setting-CA Server4Statistics Advanced Wireless ModePage QoS Click WMM Enable Click ApplyPage Click WMM Power Save Enable. And Click Setting… button Enable WMM Power SaveClick Direct Link Setup Enable. And Click Apply button Enable DLS Direct Link SetupSetting of DLS indicates as follow Describe DLS Status as follow Link SetupPage 7About Troubleshooting What is the Ieee 802.11g standard? What does Ieee 802.11 feature support?